Bldc controller
rjwalters·kicad-tools·boards/05-bldc-motor-controller/output/bldc_controller.kicad_pcb
About the Bldc controller PCB
Bldc controller is an open source AVR/Arduino PCB design by rjwalters, published on GitHub under the MIT license. It is a 4-layer board measuring 70 × 90 mm, with 42 components from 23 distinct parts.
Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the DRV8313PWPR and TPS7A1650DGNR. By type, the board carries 16 capacitors, 13 resistors, 5 connectors, 3 ICs, 3 diodes and 1 fuse.
It belongs with the robotics & motion designs in this gallery.
From the project
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files
Revision B is a real 42-component, 70 × 90 mm, four-layer small-motor controller: ATmega328P-AU, DRV8313PWPR integrated triple half bridge, and TPS7A1650DGNR 5 V supply. It includes reverse-input protection, fuse, transient clamp, charge-pump capacitors, current comparator, Hall inputs, AVR ISP, RUN switch input, speed trimmer and working commutation firmware.
Main components on the Bldc controller
Bldc controller bill of materials (BOM)
42 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA328P-AU ATmega328P-AU | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | DRV8313PWPR | TI_PWP0028C_EP3.4x9.7_Mask3.1x5.18_ThermalVias | U2 |
| 1 | TPS7A1650DGNR | HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm_ThermalVias | U3 |
| 1 | ZX-PZ2.54-1-2PZZ 12-24V INPUT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 2.54-1*3P MOTOR ABC | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 2.54-1*6P HALL | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | 2.54-2*3P AVR ISP | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | ZX-PZ2.54-1-2PZZ RUN SWITCH | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | SF-1206S100-2 1A 63V | Fuse_1206_3216Metric | F1 |
| 1 | 3296W-1-103LF 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SS36 | D_SMA | D1 |
| 1 | SMBJ24A | D_SMB | D2 |
| 1 | 17-21SURC/S530-A2/TR8 RED | LED_0805_2012Metric | D3 |
| 1 | EEEFT1H221AP 220uF 50V | CP_Elec_8x10.5_PolarityMark | C1 |
| 10 | CC0805KRX7R9BB104 100nF | C_0805_2012Metric | C2, C3, C5, C9, C10, C11, C12, C14 +2 |
| 2 | CL21B103KBANNNC 10nF | C_0805_2012Metric | C4, C13 |
| 1 | CL21B474KBFNNNE 470nF | C_0805_2012Metric | C6 |
| 1 | CL21B105KBFNNNE 1uF | C_0805_2012Metric | C7 |
| 1 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C8 |
| 1 | WSL2512R5000FEA 0.5R | R_2512_6332Metric | R1 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0805W8F5602T5E 56k | R_0805_2012Metric | R2 |
| 9 | 0805W8F1002T5E 10k | R_0805_2012Metric | R3, R5, R6, R7, R8, R9, R10, R11 +1 |
| 2 | 0805W8F1001T5E 1k | R_0805_2012Metric | R4, R13 |
Bldc controller design files
The KiCad project lives in the rjwalters/kicad-tools repository on GitHub; these links point at the commit this page was built from.
Bldc controller: common questions
What microcontroller does the Bldc controller use?
The Bldc controller is built around the ATMEGA328P-AU, from the AVR/Arduino family.
How big is the Bldc controller PCB?
The Bldc controller measures 70 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Bldc controller?
42 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bldc controller design files?
From the rjwalters/kicad-tools repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bldc controller design in my own project?
Yes, under the terms of its MIT license, which rjwalters chose for the repository.
Can I test firmware for the Bldc controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in kicad-tools
USB-C PD 5V supply — development
rjwalters
100 × 65 mm47 parts4LMIT74STM32
Matchgroup test routed
rjwalters
100 × 80 mm43 parts6LMIT74STM32
Matchgroup test
rjwalters
100 × 80 mm43 parts6LMIT74AVR/Arduino
Bldc controller routed
rjwalters
70 × 90 mm42 parts4LMIT74AVR/Arduino
Usb joystick
rjwalters
80 × 60 mm38 parts4LMIT74AVR/Arduino
Usb joystick routed
rjwalters
80 × 60 mm38 parts4LMIT74Diffpair test
rjwalters
90 × 70 mm36 parts4LMIT74Diffpair test routed
rjwalters
90 × 70 mm36 parts4LMIT74AVR/Arduino
Charlieplex 3x3
rjwalters
50 × 55 mm19 parts2LMIT74AVR/Arduino
Charlieplex 3x3 routed
rjwalters
50 × 55 mm19 parts2LMIT74STM32
Stm32 devboard routed
rjwalters
60 × 40 mm17 parts2LMIT74
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k