Charlieplex 3x3 routed
rjwalters·kicad-tools·boards/02-charlieplex-led/output/charlieplex_3x3_routed.kicad_pcb
About the Charlieplex 3x3 routed PCB
Charlieplex 3x3 routed is an open source AVR/Arduino PCB design by rjwalters, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 55 mm, with 19 components from 8 distinct parts.
Its main chip is the ATTINY85-20PU, from the AVR/Arduino family. By type, the board carries 9 diodes, 5 resistors, 2 connectors, 2 capacitors and 1 IC.
From the project
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files
A working 3 × 3 red LED sequencer built around a real ATtiny85-20PU. Four GPIO pins drive nine LEDs through four 330 Ω resistors. The 50 × 55 mm, two-layer board includes regulated 3.3–5 V power input, supply decoupling, reset pullup, and a standard six-pin AVR ISP header.
See HARDWARE.md for the complete pinout, verified component identities, power instructions and firmware programming. U1, J1 and J2 are hand-soldered after the sixteen SMT components are assembled. The supplied firmware advances through D1–D9; physical hardware testing has not yet been performed.
Main components on the Charlieplex 3x3 routed
Charlieplex 3x3 routed bill of materials (BOM)
19 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATTINY85-20PU ATtiny85-20PU | DIP-8_W7.62mm | U1 |
| 1 | C7501260 POWER | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | C65114 AVR-ISP | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 9 | LED | LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 1 | 100NF 100nF | C_0805_2012Metric | C1 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C2 |
| 4 | 330R | R_0805_2012Metric | R1, R2, R3, R4 |
| 1 | 10K 10k | R_0805_2012Metric | R5 |
Charlieplex 3x3 routed design files
The KiCad project lives in the rjwalters/kicad-tools repository on GitHub; these links point at the commit this page was built from.
Charlieplex 3x3 routed: common questions
What microcontroller does the Charlieplex 3x3 routed use?
The Charlieplex 3x3 routed is built around the ATTINY85-20PU, from the AVR/Arduino family.
How big is the Charlieplex 3x3 routed PCB?
The Charlieplex 3x3 routed measures 50 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Charlieplex 3x3 routed?
19 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Charlieplex 3x3 routed design files?
From the rjwalters/kicad-tools repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Charlieplex 3x3 routed design in my own project?
Yes, under the terms of its MIT license, which rjwalters chose for the repository.
Can I test firmware for the Charlieplex 3x3 routed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in kicad-tools
USB-C PD 5V supply — development
rjwalters
100 × 65 mm47 parts4LMIT74STM32
Matchgroup test routed
rjwalters
100 × 80 mm43 parts6LMIT74STM32
Matchgroup test
rjwalters
100 × 80 mm43 parts6LMIT74AVR/Arduino
Bldc controller routed
rjwalters
70 × 90 mm42 parts4LMIT74AVR/Arduino
Bldc controller
rjwalters
70 × 90 mm42 parts4LMIT74AVR/Arduino
Usb joystick
rjwalters
80 × 60 mm38 parts4LMIT74AVR/Arduino
Usb joystick routed
rjwalters
80 × 60 mm38 parts4LMIT74Diffpair test
rjwalters
90 × 70 mm36 parts4LMIT74Diffpair test routed
rjwalters
90 × 70 mm36 parts4LMIT74AVR/Arduino
Charlieplex 3x3
rjwalters
50 × 55 mm19 parts2LMIT74STM32
Stm32 devboard routed
rjwalters
60 × 40 mm17 parts2LMIT74
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k