Main
rohit-env·minideck-pcb·pcb/mainPCB.kicad_pcb
About the Main PCB
Main is an open source ESP32 PCB design by rohit-env, published on GitHub. It is a 4-layer board measuring 161 × 87 mm, with 183 components from 54 distinct parts.
Its main chip is the ESP32-S2FH4, from the ESP32 family. Other key parts include the FE1.1S-BSOP28BCN, MP2615CGQ-Z-(QFN-16), IP2721-(TSSOP-16), MM3220/S8252-(SOT-23-6) and AT24CM01-SSHM-B. By type, the board carries 61 switches, 40 capacitors, 37 resistors, 13 connectors, 11 ICs and 7 diodes.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic. built it because laptops are boring and carrying around raw PCBs just hits different.the board’s got space for a pi, a couple
so I went off and designed a whole cyberdeck pcb, it’s kinda sick, it's a full-on deck with ports, buttons, blinky stuff, and that clean hacker aesthetic. built it because laptops are boring and carrying around raw PCBs just hits different.the board’s got space for a pi, a couple usb ports, an oled, and some clicky switches. stuff’s laid out in a way that makes sense, but also makes you look like you’re about to jack into the matrix at a coffee shop. the idea is simple cram as much functional coolness as possible onto one board and still make it portable enough to flex at meetups. this whole…
Main components on the Main
Main bill of materials (BOM)
183 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FE1.1S-BSOP28BCN Terminus | SSOP-28 (3.9x9.9x0.635) | U1 |
| 1 | MP2615CGQ-Z-(QFN-16) monolithic-power-systems-inc | QFN-16 (3x3-MP2615) | U2 |
| 1 | IP2721-(TSSOP-16) INJOINIC TECHNOLOGY | TSSOP-16 | U3 |
| 1 | MM3220/S8252-(SOT-23-6) | SOT-23-6 | U4 |
| 1 | AT24CM01-SSHM-B microchip | SOP-8 | U5 |
| 1 | RT9742GGJ5 richtek-usa-inc | SOT-23-5 | U7 |
| 2 | AP62300TWU-7-(SOT-23-6) diodes-incorporated | SOT-23-6 | U10, U14 |
| 1 | RT9742SNGV richtek-usa-inc | SOT-23-3 | U11 |
| 1 | ESP32-S2FH4 Espressif Systems | QFN-56 (7x7x0.4) | U12 |
| 1 | 74LVC1G07SE-7-(SOT-353) diodes-incorporated | SOT-353 | U20 |
| 1 | keystone-PN1048 Keystone | Battery_holder-18650x2(keystone-PN1048) | M1 |
| 1 | DF40C-100DS-0.4V(51) Hirose Electric Co Ltd | Module-ComputeModule4-CM4 | M3 |
| 2 | DMP3037LSS-13 Diodes Incorporated | SOP-8 | Q1, Q4 |
| 1 | BCW66HVL-(2N2222) Onsemi | SOT-23-3 | Q2 |
| 2 | MOSFET-N Alpha & Omega Semiconductor Inc. | SOP-8 | Q3, Q5 |
| 1 | AOSP36326C Alpha & Omega Semiconductor Inc. | SOP-8 | Q6 |
| 1 | 40mhz-(RH100-40.000-16-F-1010-TR) raltron-electronics | Crystal-3225-SMD | Y1 |
| 1 | 12MHz-(RH100-12.000-12-1010-X-TR-NS2) raltron-electronics | Crystal-3225-SMD | Y2 |
| 3 | CF20401D0R0-NH cvilux-usa | FPC-40-0.5mm-horizontal | J1, J7, J13 |
| 1 | Conn_02x06-(RS2-12-G) Adam Tech | PinHeader_2x06_P2.54mm_Vertical | J2 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 12402012E212A Amphenol | USB_C-Female-(16-Pin) | J4, J9 |
| 2 | Conn_02x03-(RS2-06-G) Adam Tech | PinHeader_2x03_P2.54mm_Vertical | J5, J14 |
| 1 | Micro_SD_Card_Det Molex | SD-Micro-Push-Push(MOLEX_503398-1892) | J6 |
| 1 | HDMI_A-(2086581051) Molex | HDMI(EDAC 690-019-298-412) | J8 |
| 1 | 629104190121 würth-elektronik | USB_A-horizontal-SMD-3 | J10 |
| 1 | B2B-PH-SM4-TB Jst-sales-america-inc | JST-PH2-Vertical | J11 |
| 1 | SFV5R-2STBE1HLF amphenol | FPC-5-0.5mm-horizontal | J12 |
| 1 | 0ZCG0260BF2B bel-fuse-inc | Fuse-1812 | F1 |
| 54 | PTS526 SK15 SMTR2 LFS-(C&K) C&K | Switch-4x4x1.5-(PTS526) | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +46 |
| 1 | Switch-6.2X4-DIP(DS04-254-2-04BK) same-sky | Switch-6.2X4-DIP(DS04-254-2-04BK) | SW45 |
| 6 | TS04-66-85-BK-160-SMT same-sky | Switch-6x6xXX-Extend | SW57, SW58, SW59, SW60, SW61, SW64 |
| 4 | LED | LED-0805 | D1, D2, D3, D5 |
| 2 | MBR0540T3G same-sky | Diode-SOD-123 | D4, D9 |
| 1 | BAT54C-(SOT23) Nexperia | SOT-23-3 | D7 |
| 2 | 10uH-(74404064100) würth-elektronik | Inductor-6.0x6.0xH4.5 | L1, L2 |
| 1 | 6.8uH-(74404064068) würth-elektronik | Inductor-6.0x6.0xH4.5 | L3 |
| 11 | 10uF | Capacitor-1206 | C1, C5, C15, C17, C18, C19, C25, C28 +3 |
| 6 | 22uF | Capacitor-1206 | C2, C12, C47, C48, C49, C50 |
| 4 | 1uF | Capacitor-0805 | C3, C4, C6, C11 |
| 15 | 0.1uF | Capacitor-0805 | C7, C8, C9, C10, C20, C21, C22, C23 +7 |
| 2 | 100pF | Capacitor-0805 | C24, C44 |
| 2 | 16pF | Capacitor-0805 | C27, C30 |
| 3 | 2.2k | Resistor-0805 | R1, R22, R28 |
| 11 | 10k | Resistor-0805 | R2, R3, R4, R5, R10, R12, R27, R40 +3 |
| 7 | 100k | Resistor-0805 | R6, R16, R19, R23, R24, R26, R33 |
| 1 | 33.2K | Resistor-0805 | R7 |
| 2 | 5.1k | Resistor-0805 | R8, R9 |
| 4 | 1k | Resistor-0805 | R11, R14, R18, R53 |
| 3 | 220R | Resistor-0805 | R13, R30, R31 |
| 1 | 5.1k | Resistor-1206 | R15 |
| 2 | 330R | Resistor-0805 | R17, R25 |
| 1 | 56.2k | Resistor-0805 | R20 |
| 1 | 2.7k | Resistor-0805 | R21 |
| 1 | 50mR | Resistor-1206 | R51 |
Main design files
The KiCad project lives in the rohit-env/minideck-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/mainPCB.kicad_pcb
- Schematicpcb/mainPCB.kicad_sch
Main: common questions
What microcontroller does the Main use?
The Main is built around the ESP32-S2FH4, from the ESP32 family.
How big is the Main PCB?
The Main measures 161 × 87 mm, has 4 copper layers and is 1.2 mm thick.
How many components are on the Main?
183 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the Main design files?
From the rohit-env/minideck-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Main design in my own project?
The repository has no license, so all rights stay with rohit-env. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in minideck-pcb
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k