Cortex controller
rubaiyat666·Ghost-1·Kicad/Cortex_controller/Cortex_controller.kicad_pcb
About the Cortex controller PCB
Cortex controller is an open source ESP32 PCB design by rubaiyat666, published on GitHub under the MIT license. It is a 2-layer board measuring 29.5 × 110.5 mm, with 15 components from 7 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the Receiver_pwm, MPU6050, LED and 300Ω.
It belongs with the robotics & motion and rf & radio designs in this gallery.
From the project
A Drone made with a transceiver and flight controller that I made.
A Drone made with a transceiver and flight controller that I made. There is nothing much to say about this because it speaks for itself. Well it's ment to be fast. And one of the most fun thing about this is its fully diy. From the trasmitter to the flight controller. The firmware for the flight controller is from opensource Betaflight github.
This is the transmitter that's used. Checkout https://github.com/VampireBandit/Transceiver_101

Main components on the Cortex controller
Cortex controller bill of materials (BOM)
15 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Receiver_pwm | PinHeader_1x06_P2.54mm_Vertical | U1 |
| 1 | MPU6050 | MODULE_GY-521 | U2 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U3 |
| 1 | LED Wurth(伍尔特) | LED_D3.0mm | U4 |
| 1 | 300Ω Ohmite | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | U5 |
| 8 | 171825-4 TE Connectivity(泰科电子) | FanPinHeader_1x04_P2.54mm_Vertical | I2C_1, I2C_2, I2C_3, I2C_4, MOT1ESC1, MOT2ESC1, MOT3ESC1, MOT4ESC1 |
| 2 | 1 | PinHeader_1x02_P2.54mm_Vertical | Power1, Tx_RX1 |
Cortex controller design files
The KiCad project lives in the rubaiyat666/Ghost-1 repository on GitHub; these links point at the commit this page was built from.
Cortex controller: common questions
What microcontroller does the Cortex controller use?
The Cortex controller is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Cortex controller PCB?
The Cortex controller measures 29.5 × 110.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cortex controller?
15 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cortex controller design files?
From the rubaiyat666/Ghost-1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cortex controller design in my own project?
Yes, under the terms of its MIT license, which rubaiyat666 chose for the repository.
Can I test firmware for the Cortex controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Ghost-1
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k