Microll
RubenTrov·Microll
About the Microll PCB
Microll is an open source ESP32 PCB design by RubenTrov, published on GitHub. It is a 2-layer board measuring 39 × 46 mm, with 36 components from 22 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the TLV76733DRVx, STM32G0B1CBT6, BSD235NH6327XTSA1, 452403012014 and LSM6DSL. By type, the board carries 11 resistors, 9 capacitors, 8 ICs, 4 connectors, 3 diodes and 1 switch.
It belongs with the iot & wireless and usb & debug tools designs in this gallery.
From the project
This is going to be a small PCB with a microcontroller, IMU and a form of wirelessly transmitting that information though wifi/bluetooh. It will serve as a central piece for a lot of future IoT projects.
Main components on the Microll
Microll bill of materials (BOM)
36 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-N4 | ESP32-C3-WROOM-02-N4 | U1 |
| 1 | TLV76733DRVx | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U2 |
| 1 | STM32G0B1CBT6 | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | BSD235NH6327XTSA1 | SOT-363_SC-70-6 | U4 |
| 1 | 452403012014 | DPDT_Switch_x2 | U5 |
| 1 | LSM6DSL | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U6 |
| 1 | NX7002AKW,115 | SOT-323_SC-70 | U8 |
| 1 | USBLC6-2P6 | SOT-666 | U9 |
| 1 | Conn_01x12 | PinSocket_1x12_P2.54mm_Vertical | J1 |
| 1 | Conn_02x10_Top_Bottom | PinSocket_2x10_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
| 1 | SW_DIP_x03 | WE_DIP_SWITCH_3_POS | SW4 |
| 1 | LED_ARGB | APTF1616LSEEZGKQBKC | D1 |
| 1 | PMEG6020AELR | D_SOD-123 | D2 |
| 1 | UFZV15B | D_SOD-323F | D3 |
| 3 | 1uF | C_0402_1005Metric | C1, C2, C9 |
| 5 | 100nF | C_0402_1005Metric | C3, C5, C6, C7, C8 |
| 1 | 4.7uF | C_0603_1608Metric | C4 |
| 3 | 330 | R_0402_1005Metric | R1, R2, R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 10k | R_0402_1005Metric | R4, R5, R8, R9, R10, R11 |
| 2 | 5.1k | R_0402_1005Metric | R6, R7 |
Microll design files
The KiCad project lives in the RubenTrov/Microll repository on GitHub; these links point at the commit this page was built from.
- LayoutMicroll.kicad_pcb
- SchematicMicroll.kicad_sch
Microll: common questions
What microcontroller does the Microll use?
The Microll is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Microll PCB?
The Microll measures 39 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Microll?
36 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Microll design files?
From the RubenTrov/Microll repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Microll design in my own project?
The repository has no license, so all rights stay with RubenTrov. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Microll without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k