HardLabs

KiCAD converted

sai-ydev·air_quality_wearable·KiCAD_converted/KiCAD_converted.kicad_pcb

KiCAD converted PCB layout, top view — open source ESP32 board by sai-ydev

About the KiCAD converted PCB

KiCAD converted is an open source ESP32 PCB design by sai-ydev, published on GitHub under the MIT license. It is a 4-layer board measuring 47 × 47 mm, with 62 components from 34 distinct parts.

Its main chip is the ESP32-C6-MINI-1-N4, from the ESP32 family. Other key parts include the ZMOD4510AI1R, BME690, TPS63001DRCR, LM66100DCKR and XTSD04GLGEAG. By type, the board carries 25 capacitors, 14 resistors, 9 ICs, 5 connectors, 2 diodes and 2 inductors.

It belongs with the wearables and sensors designs in this gallery.

Main components on the KiCAD converted

ZMOD4510AI1RESP32-C6-MINI-1-N4BME690TPS63001DRCRLM66100DCKRXTSD04GLGEAGC5795601MCP73831T-2ACI/OT

KiCAD converted bill of materials (BOM)

62 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ZMOD4510AI1R
IC1
1
ESP32-C6-MINI-1-N4
U1
1
BME690
U2
1
TPS63001DRCR
U3
2
LM66100DCKR
U4, U5
1
XTSD04GLGEAG
U6
1
C5795601
PCF8563T/F4,118
U7
1
MCP73831T-2ACI/OT
U$1
1
Q13FC13500003
Y1
1
C448647
JTAG
J1
1
TYPE-C-31-M-12
J2
1
C133065
SM06B-GHS-TB(LF)(SN)
J3
1
S2B-PH-K-S
J4
1
SM04B-SRSS-TB(LF)(SN)
J5
2
MOMENTARY-SWITCH-SPST-SMD-4.6X2.8MM
BOOT0, RESET0
1
JS202011JCQN
S1
1
WS2812B-2020
LED1
2
C2286
RED
D2, D3
1
2.2NH
2.2nH
L1
1
NR3015T2R2M
L2
Show 14 more
QtyPartRefs
1
22UF
22uF
C1
13
0.1UF
0.1uF
C2, C4, C9, C10, C14, C15, C16, C17 +5
1
1.0UF
1.0uF
C3
2
12PF
12pF
C5, C6
2
DNP
C7, C8
3
10UF
10UF0402
C11, C12, C13
1
4.7UF
4.7UF0402
C19
2
0.1UF
0.1uF
C22, C24
5
2.2K
10k
R1, R6, R9, R11, R12
3
0
R2, R4, R5
2
5.1K
5.1k
R7, R8
2
100OHM
R10, R13
1
2.0K
R14
1
470
R15

KiCAD converted design files

The KiCad project lives in the sai-ydev/air_quality_wearable repository on GitHub; these links point at the commit this page was built from.

KiCAD converted: common questions

What microcontroller does the KiCAD converted use?

The KiCAD converted is built around the ESP32-C6-MINI-1-N4, from the ESP32 family.

How big is the KiCAD converted PCB?

The KiCAD converted measures 47 × 47 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the KiCAD converted?

62 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the KiCAD converted design files?

From the sai-ydev/air_quality_wearable repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the KiCAD converted design in my own project?

Yes, under the terms of its MIT license, which sai-ydev chose for the repository.

Can I test firmware for the KiCAD converted without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in air_quality_wearable

Similar boards