Cablecat

samchin·cablecat

Cablecat PCB layout, top view — open source ESP32 board by samchin

About the Cablecat PCB

Cablecat is an open source ESP32 PCB design by samchin, published on GitHub under the CERN-OHL-W-2.0 license. It is a 6-layer board measuring 17.8 × 21.1 mm, with 63 components from 38 distinct parts.

Its main chip is the C74340, from the ESP32 family. Other key parts include the BAOCHIP1X, TPS22916CYFPR, SGM6029BYG/TR, XIAO-HALF-HOLE-23P and SGM7222YWQ10. By type, the board carries 23 capacitors, 16 resistors, 8 ICs, 8 diodes, 2 transistors and 2 switches.

From the project

a serial cable for UART, I2C and SPI

Main components on the Cablecat

Cablecat bill of materials (BOM)

63 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BAOCHIP1X
baochip1x
U1
2
TPS22916CYFPR
TI
U2, U8
1
SGM6029BYG/TR
SMD IC PMIC;DCDC Buck-ADJ-1A,Vin 1.95V to 5.5V,Vout 0.8V to 1.55V;WLCSP-6B
SGMICRO
U3
1
XIAO-HALF-HOLE-23P
U4
1
SGM7222YWQ10
SGM7222YWQ10/TR
U5
1
SGM40567-4.2XG/TR
SGMICRO
U7
1
SGM6029CYG/TR
SMD IC PMIC;DCDC Buck-ADJ-1A,Vin 1.95V to 5.5V,Vout 1.8V to 3.3V;WLCSP-6B
SGMICRO
U9
1
LP0404N3T5G
LRC
Q1
1
LN237N3T5G
LRC
Q2
1
48.000MHZ
48.000MHz
Y2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
2
SKTAAAE010
ALPSALPINE
SW1, SW2
1
WS2812B-1010
D1
1
PSBD2FD40V1H
D2
1
LNZ8F5V6T5G
LRC
D3
1
C74340
Yellow
D4
4
B74121U0055M060
TDK
D5, D6, D7, D8
2
TFM160808ALC-R47MTAA
0.47uH
TDK
L1, L3
2
CC0201JRNPO9BN120
12pF C0G
C1, C10
2
CL05A105KA5NQNC
1.0uF, 10V, X5R
C2, C11
Show 18 more
QtyPartRefs
3
GRM033R61A105ME44D
1uF
muRata
C3, C6, C27
5
CL05B104KO5NNNC
0.1uF, 10V, X5R
C4, C7, C8, C13, C18
3
GRM033R60J225ME47D
2.2uF, 6.3V, X5R
C5, C9, C15
4
CC0402MRX5R6BB106
10uF
YAGEO
C14, C17, C19, C21
3
CC0201KRX5R6BB104
100nF
YAGEO
C16, C20, C22
1
CC0201KRX7R7BB102
1nF
YAGEO
C26
1
ANY
1.5k
R1
1
ANY
100 ohm
R2
1
ANY
4.7M
R3
1
ANY
10k, 1%
R4
3
ANY
5.1k, 1%
R5, R8, R11
1
12.1K
12.1k
R6
1
RC0201FR-075K1L
5.1K
YAGEO
R7
1
RC0201FR-07150KL
150K
YAGEO
R12
3
RC0201FR-07470KL
470K
YAGEO
R13, R14, R16
1
RC0201FR-07249KL
249K
YAGEO
R15
1
RC0201FR-072K2L
2.2K
YAGEO
R19
1
RC0201FR-07100RL
100R
YAGEO
R20

Cablecat design files

The KiCad project lives in the samchin/cablecat repository on GitHub; these links point at the commit this page was built from.

Cablecat: common questions

What microcontroller does the Cablecat use?

The Cablecat is built around the C74340, from the ESP32 family.

How big is the Cablecat PCB?

The Cablecat measures 17.8 × 21.1 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Cablecat?

63 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cablecat design files?

From the samchin/cablecat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cablecat design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which samchin chose for the repository.

Can I test firmware for the Cablecat without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards