4 open source boards using the BAOCHIP1X

Real designs built with the BAOCHIP1X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The BAOCHIP1X in open source designs

The gallery holds 4 open source boards using the BAOCHIP1X from 3 GitHub repositories; a typical one measures about 21 × 44.7 mm and carries around 38 components.

75% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Dabao by baochip.

Parts used alongside the BAOCHIP1X

Microcontrollers on boards using the BAOCHIP1X

What boards using the BAOCHIP1X are built for

BAOCHIP1X: common questions

Where can I find a BAOCHIP1X reference design?

Each of the 4 boards on this page is a real design using the BAOCHIP1X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the BAOCHIP1X use?

Most are built on ESP32 (1).

How big is a typical board using the BAOCHIP1X?

The median is 21 × 44.7 mm, and 75% are two-layer designs.

What is the most popular open source board using the BAOCHIP1X?

By GitHub stars, Dabao by baochip, with 49 stars.

Can I simulate one of these boards using the BAOCHIP1X before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part