ROV PCIE USB HUB FINAL
samnadol·ROV_PCIe_USB_HUB·ROV_PCIe_USB_HUB_FINAL/ROV_PCIE_USB_HUB_FINAL.kicad_pcb
About the ROV PCIE USB HUB FINAL PCB
ROV PCIE USB HUB FINAL is an open source Raspberry Pi PCB design by samnadol, published on GitHub. It is a 4-layer board measuring 65 × 56.5 mm, with 161 components from 68 distinct parts.
Its main chip is the 691311500102, from the Raspberry Pi family. Other key parts include the UPD720201K8-701-BAC-A, SST25VF512A-33-4C-SAE, TPS62A02APDDC, TPS2051CDBVR and TS3USB30EDGSR. By type, the board carries 71 capacitors, 48 resistors, 16 ICs, 11 connectors, 7 diodes and 5 crystals.
It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
up-to-16 port USB hub + PCIe host controller "hat" for Pi 5
Main components on the ROV PCIE USB HUB FINAL
ROV PCIE USB HUB FINAL bill of materials (BOM)
161 components, 68 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UPD720201K8-701-BAC-A MX25V5126FZUI | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U1 |
| 1 | SST25VF512A-33-4C-SAE UPD720201K8-7x1-BAC-A | QFN-68-1EP_8x8mm_P0.4mm_EP6.2x6.2mm | U2 |
| 1 | TPS62A02APDDC USB2422/MJ | QFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U3 |
| 1 | TPS62A02APDDC TPS2051CDBV | SOT-23-5 | U4 |
| 2 | TPS2051CDBVR TPS2051CDBV | SOT-23-5 | U5, U10 |
| 2 | TPS2051CDBVR USB2422/MJ | QFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U6, U9 |
| 1 | TS3USB30EDGSR TPS2051CDBV | SOT-23-5 | U7 |
| 1 | USB2514B/M2 TPS2051CDBV | SOT-23-5 | U8 |
| 1 | MIC5504-3.3YM5 TPS2051CDBV | SOT-23-5 | U11 |
| 1 | TPS2116DRL USB2422/MJ | QFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U12 |
| 2 | USBLC6-2SC6 TPS2051CDBV | SOT-23-5 | U13, U14 |
| 2 | TPS62A02APDDC | SOT-23-6 | U15, U16 |
| 1 | DMP3018SFV | Diodes_PowerDI3333-8 | Q1 |
| 2 | ABM8-24.000MHZ-B2-T ECS-240-8-37B-CKY-TR | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1, Y2 |
| 3 | ECS-240-8-37B-CKY-TR | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y3, Y4, Y5 |
| 1 | 525591652 SFV16R-1STBE1HLF | AMPHENOL_SFV16R-1STBE1HLF | J1 |
| 1 | 691311500102 Raspberry_Pi_4 | PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | 1053131102 | 1053131102 | J3 |
| 7 | SM04B-SRSS-TB | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5, J6, J8, J9, J10, J11, J12 |
| 1 | 629722000214 SM04B-SRSS-TB | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
Show 48 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | LTST-C190KGKT LED_Small | LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 1 | SMAJ5.0A | D_SMA | D6 |
| 1 | BAT54W | SOT-323_SC-70 | D8 |
| 2 | DFE252012F-1R0M 1u | L_1008_2520Metric | L1, L2 |
| 1 | CC0402KRX7R8BB104 330n | C_0402_1005Metric | C1 |
| 22 | CC0402KRX7R8BB104 100n | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C13 +14 |
| 4 | CC1206KKX5R8BB226 100n | C_0402_1005Metric | C9, C21, C28, C32 |
| 3 | CC0805KRX5R8BB106 100n | C_0402_1005Metric | C10, C29, C51 |
| 4 | CC0402KRX7R8BB104 10p | C_0402_1005Metric | C11, C12, C36, C37 |
| 2 | CC0402KRX7R8BB104 22u | C_1206_3216Metric | C16, C17 |
| 4 | CC0402JRNPO9BN270 100n | C_0402_1005Metric | C24, C25, C48, C49 |
| 2 | CC0402KPX5R6BB334 10p | C_0402_1005Metric | C26, C47 |
| 1 | 10p | C_0402_1005Metric | C27 |
| 2 | CC0402KRX7R8BB104 1u | C_0603_1608Metric | C30, C50 |
| 5 | 100n | C_0402_1005Metric | C31, C58, C59, C61, C62 |
| 13 | CC0805KRX5R8BB106 10u | C_0805_2012Metric | C33, C34, C35, C43, C44, C45, C53, C54 +5 |
| 1 | CC0805KRX5R8BB106 1u | C_0603_1608Metric | C40 |
| 1 | CC0805KRX5R8BB106 10p | C_0402_1005Metric | C46 |
| 2 | CC0603KRX7R8BB105 10p | C_0402_1005Metric | C56, C57 |
| 1 | 1u | C_0603_1608Metric | C60 |
| 1 | 10u | C_0805_2012Metric | C63 |
| 2 | CC1206KKX5R8BB226 22u | C_1206_3216Metric | C72, C73 |
| 2 | RC0603FR-075K1L 100k | R_0603_1608Metric | R1, R23 |
| 1 | RC0603FR-07100KL 5k1 | R_0603_1608Metric | R2 |
| 4 | RC0603FR-0710KL 10k | R_0603_1608Metric | R3, R10, R44, R45 |
| 2 | RC0603FR-0710KL 270R | R_0603_1608Metric | R4, R5 |
| 3 | RC0603FR-0710KL 100R | R_0603_1608Metric | R6, R7, R8 |
| 1 | RC0402JR-070RL 10k | R_0402_1005Metric | R11 |
| 1 | RC0603FR-071K6L 10k | R_0402_1005Metric | R12 |
| 3 | RC0603FR-0710KL 10k | R_0402_1005Metric | R13, R16, R24 |
| 1 | RC0603FR-07453KL 100k | R_0603_1608Metric | R14 |
| 2 | RC0603FR-07100KL 10k | R_0402_1005Metric | R15, R18 |
| 1 | RC0603FR-0775KL 1k6 1% | R_0603_1608Metric | R17 |
| 1 | RC0603FR-0710KL 0 | R_0402_1005Metric | R19 |
| 2 | RC0603FR-0710KL 12k | R_0603_1608Metric | R20, R26 |
| 1 | RC0603FR-0712KL 100k | R_0603_1608Metric | R21 |
| 1 | RC0603FR-0710KL 100k | R_0603_1608Metric | R22 |
| 3 | RC0603FR-075K1L 10k | R_0402_1005Metric | R25, R30, R36 |
| 4 | RC0603FR-07100KL 100k | R_0603_1608Metric | R27, R35, R47, R49 |
| 3 | RC0603FR-07270RL 100k | R_0603_1608Metric | R28, R29, R33 |
| 1 | RC0603FR-07270RL 10k | R_0402_1005Metric | R31 |
| 1 | RC0603FR-07100RL 12k | R_0603_1608Metric | R32 |
| 1 | RC0603FR-07100RL 100k | R_0603_1608Metric | R34 |
| 3 | 10k | R_0402_1005Metric | R37, R42, R43 |
| 1 | 12k | R_0603_1608Metric | R38 |
| 3 | 100k | R_0603_1608Metric | R39, R40, R41 |
| 1 | RC0603FR-07453KL 453k | R_0603_1608Metric | R46 |
| 1 | RC0603FR-0775KL 75k | R_0603_1608Metric | R48 |
ROV PCIE USB HUB FINAL design files
The KiCad project lives in the samnadol/ROV_PCIe_USB_HUB repository on GitHub; these links point at the commit this page was built from.
ROV PCIE USB HUB FINAL: common questions
What microcontroller does the ROV PCIE USB HUB FINAL use?
The ROV PCIE USB HUB FINAL is built around the 691311500102, from the Raspberry Pi family.
How big is the ROV PCIE USB HUB FINAL PCB?
The ROV PCIE USB HUB FINAL measures 65 × 56.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ROV PCIE USB HUB FINAL?
161 components, from 68 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ROV PCIE USB HUB FINAL design files?
From the samnadol/ROV_PCIe_USB_HUB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ROV PCIE USB HUB FINAL design in my own project?
The repository has no license, so all rights stay with samnadol. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ROV PCIE USB HUB FINAL without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in ROV_PCIe_USB_HUB
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507