Rov usb
samnadol·ROV_PCIe_USB_HUB·ROV_PCIe_USB_HUB_USB2514/rov_usb.kicad_pcb
About the Rov usb PCB
Rov usb is an open source PCB design by samnadol, published on GitHub. It is a 4-layer board measuring 55.5 × 68.5 mm, with 133 components from 37 distinct parts.
Other key parts include the UPD720201K8-701-BAC-A, SST25VF512A-33-4C-SAE, TPS62A02APDDC, USBLC6-2SC6 and TPS2051CDBVR. By type, the board carries 55 capacitors, 36 resistors, 21 ICs, 7 connectors, 7 diodes and 4 inductors.
It belongs with the dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
up-to-16 port USB hub + PCIe host controller "hat" for Pi 5
Main components on the Rov usb
Rov usb bill of materials (BOM)
133 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UPD720201K8-701-BAC-A UPD720201K8-7x1-BAC-A | QFN-68-1EP_8x8mm_P0.4mm_EP6.2x6.2mm | U1 |
| 1 | SST25VF512A-33-4C-SAE | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | TPS62A02APDDC | SOT-23-6 | U3, U4 |
| 8 | USBLC6-2SC6 | SOT-23-6 | U5, U6, U8, U10, U12, U16, U17, U19 |
| 4 | TPS2051CDBVR | SOT-23-5 | U7, U11, U15, U18 |
| 1 | TPD4E05U06DQAR | USON-10_2.5x1.0mm_P0.5mm | U9 |
| 1 | TS3USB30EDGSR | TSSOP-10_3x3mm_P0.5mm | U13 |
| 1 | USB2514B/M2 | QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U14 |
| 1 | MIC5504-3.3YM5-TR | SOT-23-5 | U20 |
| 1 | TPS2116DRLR | SOT-583-8 | U21 |
| 1 | DMP3018SFV | Diodes_PowerDI3333-8 | Q1 |
| 2 | ABM8-24.000MHZ-B2-T | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2 |
| 1 | 691311500102 | J_Wurth_WR-TBL_691311500102 | J2 |
| 3 | USB-A-D-RA Wurth Elektronik | J_Wurth_WR-USB_61400826021 | J4, J6, J7 |
| 1 | USB-A3-S-VT-CS5A Wurth Elektronik | J_Wurth_WR-USB_692121430000 | J5 |
| 1 | USB4085-GF-A Wurth Elektronik | J_Wurth_WR-USB_629722000214 | J8 |
| 1 | 525591652 | 525591652 | J9 |
| 1 | SMAJ5.0A | D_SMA | D1 |
| 6 | LTST-C190KGKT Green | LED_0603_1608Metric | D3, D4, D5, D6, D7, D8 |
| 2 | BLM21PG221SN1D 220 Ohm @ 100MHz, low DCR | L_0805_2012Metric | FB1, FB2 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BDCC00201208R47MWA | L_0805_2012Metric | L1, L2 |
| 31 | CC0402KRX7R8BB104 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +23 |
| 4 | CC1206KKX5R8BB226 22u | C_1206_3216Metric | C9, C21, C28, C32 |
| 11 | CC0805KRX5R8BB106 10u | C_0805_2012Metric | C10, C29, C33, C35, C40, C43, C44, C46 +3 |
| 4 | CC0402JRNPO9BN270 27p | C_0402_1005Metric | C24, C25, C48, C49 |
| 2 | CC0402KPX5R6BB334 330n | C_0402_1005Metric | C26, C47 |
| 3 | CC0603KRX7R8BB105 1u | C_0603_1608Metric | C54, C56, C57 |
| 5 | RC0603FR-075K1L 5k1 | R_0603_1608Metric | R1, R21, R25, R27, R32 |
| 6 | RC0603FR-07100KL 100k | R_0603_1608Metric | R2, R4, R10, R16, R19, R29 |
| 14 | RC0603FR-0710KL 10k | R_0603_1608Metric | R3, R5, R6, R7, R8, R9, R11, R14 +6 |
| 1 | RC0402JR-070RL 0 | R_0402_1005Metric | R12 |
| 1 | RC0603FR-071K6L 1k6 1% | R_0603_1608Metric | R13 |
| 1 | RC0603FR-07453KL 453k | R_0603_1608Metric | R15 |
| 1 | RC0603FR-0775KL 75k | R_0603_1608Metric | R18 |
| 1 | RC0603FR-0712KL 12k 1% | R_0603_1608Metric | R23 |
| 4 | RC0603FR-07270RL 270R | R_0603_1608Metric | R30, R31, R33, R35 |
| 2 | RC0603FR-07100RL 100R | R_0603_1608Metric | R34, R36 |
Rov usb design files
The KiCad project lives in the samnadol/ROV_PCIe_USB_HUB repository on GitHub; these links point at the commit this page was built from.
Rov usb: common questions
How big is the Rov usb PCB?
The Rov usb measures 55.5 × 68.5 mm, has 4 copper layers and is 1.591 mm thick.
How many components are on the Rov usb?
133 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rov usb design files?
From the samnadol/ROV_PCIe_USB_HUB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rov usb design in my own project?
The repository has no license, so all rights stay with samnadol. Use it as a reference, and ask the author before reusing the design.
More boards in ROV_PCIe_USB_HUB
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979