Presence-Sensor
Sanderhuisman·Presence-Sensor·pcb/presence_sensor.kicad_pcb
About the Presence-Sensor PCB
Presence-Sensor is an open source ESP32 PCB design by Sanderhuisman, published on GitHub under the MIT license. It is a 2-layer board measuring 28 × 65 mm, with 67 components from 33 distinct parts.
Its main chip is the ESP32-S2-MINI-1, from the ESP32 family. Other key parts include the USBLC6-2P6, AMS1117-3.3, AP2161W, BMP280 and FSUSB42UMX. By type, the board carries 24 capacitors, 22 resistors, 7 ICs, 4 connectors, 4 diodes and 3 switches.
It belongs with the sensors designs in this gallery.
Main components on the Presence-Sensor
Presence-Sensor bill of materials (BOM)
67 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S2-MINI-1 | XCVR_ESP32-S2-MINI-1 | U1 |
| 1 | USBLC6-2P6 | SOT-666 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | AP2161W | SOT-23-5 | U4 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U5 |
| 1 | FSUSB42UMX | IC_FSUSB42UMX | U6 |
| 1 | CP2102N-Axx-xQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U7 |
| 1 | MBT3904DW1 | SOT-363_SC-70-6 | Q1 |
| 1 | NX3215SA-32.768K-STD-MUA-8 32.768MHz | NX3215SA | Y1 |
| 1 | SEN0395 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | USB4105 | GCT_USB4105_REVA | J2 |
| 1 | SM04B-SRSS-TB(LF)(SN) | JST_SM04B-SRSS-TB(LF)(SN) | J3 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | DLP11SN900HL2L | FIL_DLP11SN900HL2L | FL1 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | SW_SPDT | SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW3 |
| 1 | ESDA25P35 | TVS_ESDA25P35-1U1M | D1 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | SP0502BAHT | SOT-23 | D3 |
| 1 | ESDA6V1-5SC6 | SOT-23-6 | D5 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 13 | 100n | C_0603_1608Metric | C1, C2, C5, C6, C11, C12, C13, C14 +5 |
| 2 | 4.7u Würth Elektronik | C_0805_2012Metric | C3, C20 |
| 4 | 22u | C_0805_2012Metric | C4, C7, C9, C10 |
| 2 | 1u | C_0603_1608Metric | C8, C23 |
| 2 | 12pF | C_0603_1608Metric | C17, C18 |
| 1 | 10u | C_0805_2012Metric | C22 |
| 6 | 0R | R_0603_1608Metric | R1, R2, R16, R17, R21, R22 |
| 9 | 10K | R_0603_1608Metric | R3, R8, R9, R10, R11, R12, R14, R19 +1 |
| 2 | 4.7K | R_0603_1608Metric | R4, R7 |
| 2 | 5.1K | R_0603_1608Metric | R5, R6 |
| 1 | DNP | R_0603_1608Metric | R13 |
| 1 | 22.1K | R_0603_1608Metric | R15 |
| 1 | 47.5K | R_0603_1608Metric | R18 |
Presence-Sensor design files
The KiCad project lives in the Sanderhuisman/Presence-Sensor repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/presence_sensor.kicad_pcb
- Schematicpcb/presence_sensor.kicad_sch
Presence-Sensor: common questions
What microcontroller does the Presence-Sensor use?
The Presence-Sensor is built around the ESP32-S2-MINI-1, from the ESP32 family.
How big is the Presence-Sensor PCB?
The Presence-Sensor measures 28 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Presence-Sensor?
67 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Presence-Sensor design files?
From the Sanderhuisman/Presence-Sensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Presence-Sensor design in my own project?
Yes, under the terms of its MIT license, which Sanderhuisman chose for the repository.
Can I test firmware for the Presence-Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k