Sram redo

scabootssca·weatherstation·Schematic/sram_redo.kicad_pcb

Sram redo PCB layout, top view — open source ESP8266 board by scabootssca

About the Sram redo PCB

Sram redo is an open source ESP8266 PCB design by scabootssca, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 271.8 × 185.4 mm, with 81 components from 55 distinct parts.

Its main chip is the NodeMCU_1.0_(ESP-12E), from the ESP8266 family. Other key parts include the MCP1826-ADJ, TC4056A_BASED_CHARGER, ATmega328P-PU, BME280Breakout and 23LC1024. By type, the board carries 24 resistors, 20 capacitors, 12 connectors, 8 ICs, 7 transistors and 5 diodes.

From the project

Needs Src/shared/config.h made with this format:

Main components on the Sram redo

MCP1826-ADJTC4056A_BASED_CHARGERATmega328P-PUBME280Breakout23LC1024NodeMCU_1.0_(ESP-12E)MCP23008RTCModule

Sram redo bill of materials (BOM)

81 components, 55 distinct parts.

QtyPartRefs
1
MCP1826-ADJ
U1
1
TC4056A_BASED_CHARGER
U2
1
ATmega328P-PU
U3
1
BME280Breakout
U4
1
23LC1024
U5
1
NodeMCU_1.0_(ESP-12E)
U6
1
MCP23008
U7
1
RTCModule
U8
3
FQP30N06L
Q1, Q4, Q6
4
FQP27P06
Q2, Q3, Q5, Q7
1
16MHz
Y1
1
SolarPanels
J1
1
TowerPlug
J2
1
ICSP Header
J3
1
Conn_01x05
J4
1
BME Connector
J5
1
Lux Connector
J6
1
BME Connector
J7
1
Conn_01x05
J8
1
ESP Connector
J9
Show 35 more
QtyPartRefs
1
ESP Connector
J10
1
Conn_01x02
J11
1
Rain_Conn
J12
1
3.6v
BT1
1
Jumper
JP1
1
SW_RESET
SW1
1
D_Schottky
D1
1
D_Schottky
D2
1
TL1431AIZT
D3
1
OK LED
D4
1
ERROR LED
D5
1
10uF
L1
2
10uF
C1, C4
1
10uF
C2
5
100nF
C3, C5, C8, C10, C20
4
100nF
C6, C11, C17, C18
1
100uF
C7
1
220uF
C9
1
47uF
C12
2
470uF
C13, C14
2
20pF
C15, C16
1
4.7uF
C19
4
10K
R1, R3, R4, R24
2
120
R2, R5
1
1k
R6
2
100K
R7, R8
1
1.1K
R9
1
3K
R10
1
820
R11
1
5.6K
R12
1
39K
R13
2
220
R14, R15
6
10K
R16, R17, R18, R19, R20, R22
1
100k
R21
1
1k
R23

Sram redo design files

The KiCad project lives in the scabootssca/weatherstation repository on GitHub; these links point at the commit this page was built from.

Sram redo: common questions

What microcontroller does the Sram redo use?

The Sram redo is built around the NodeMCU_1.0_(ESP-12E), from the ESP8266 family.

How big is the Sram redo PCB?

The Sram redo measures 271.8 × 185.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sram redo?

81 components, from 55 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sram redo design files?

From the scabootssca/weatherstation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Sram redo design in my own project?

Yes, under the terms of its GPL-3.0 license, which scabootssca chose for the repository.

Can I test firmware for the Sram redo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in weatherstation

Similar boards