14 open source boards using the 23LC1024
Real designs built with the 23LC1024, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32 VGM Player YM2612 SN76489
AidanHockey5
138.4 × 91.4 mm84 parts2LAGPL-3.0117Arduair 8800 front panel
dankar
181 × 99.1 mm103 parts2LMIT31STM32
Scoms tacnpr
partio-scout
99.1 × 99.1 mm279 parts4LTAPR-OHL-1.09ESP8266
UProgrammer-Hardware
MackPI
76.2 × 50.8 mm72 parts2LMIT2RP2040/RP2350
GameBox
PHOL-LABS
100 × 81 mm128 parts4LNo license1STM32 VGM Player YM2612 SN76489
Vakon84
138.4 × 91.4 mm84 parts2LAGPL-3.00ESP8266
Weather Station
scabootssca
91.4 × 68.6 mm81 parts2LGPL-3.00AVR/Arduino
Midievol
ToeKnee
190.5 × 127 mm49 parts2LGPL-3.00SRAMBoard
7vgn
38.1 × 24.1 mm15 parts2LNo license0Ardair 8800 front panel
dankar
217.2 × 121.9 mm103 parts2LMIT31ESP32
Main board
denorath-sys
100 × 80 mm46 parts2LCERN-OHL-W-2.05JC2 - IO2 Board
Emile666
233.7 × 160 mm96 parts2LNo license3NXP
TouchDrum
JoelEB
100 × 100 mm140 parts4LNo license0ESP8266
Sram redo
scabootssca
271.8 × 185.4 mm81 parts2LGPL-3.00
How designs wire the 23LC1024
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 23LC1024 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32 VGM Player YM2612 SN76489 by AidanHockey5, Arduair 8800 front panel by dankar, Scoms tacnpr by partio-scout and Main board by denorath-sys.
The 23LC1024 in open source designs
The gallery holds 14 open source boards using the 23LC1024 from 12 GitHub repositories; a typical one measures about 119.2 × 95.3 mm and carries around 84 components.
79% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is STM32 VGM Player YM2612 SN76489 by AidanHockey5.
Parts used alongside the 23LC1024
Microcontrollers on boards using the 23LC1024
What boards using the 23LC1024 are built for
23LC1024: common questions
Where can I find a 23LC1024 reference design?
Each of the 14 boards on this page is a real design using the 23LC1024. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 23LC1024 VCC pin?
The VCC pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 12 open source designs using the 23LC1024.
What parts are used alongside the 23LC1024?
The CH340G, AMS1117-3.3, SN76489, 74LS165 and BluePill_STM32F103C appear in the most repositories here.
Which microcontrollers do boards using the 23LC1024 use?
Most are built on ESP8266 (3), AVR/Arduino (1), ESP32 (1) and NXP (1).
How big is a typical board using the 23LC1024?
The median is 119.2 × 95.3 mm, and 79% are two-layer designs.
What is the most popular open source board using the 23LC1024?
By GitHub stars, STM32 VGM Player YM2612 SN76489 by AidanHockey5, with 117 stars.
Can I simulate one of these boards using the 23LC1024 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.