PICO COMPUTER

Scruchet·PICO_COMPUTER·Motherboard_pico/Motherboard_pico.kicad_pcb

PICO COMPUTER PCB layout, top view — open source AVR/Arduino board by Scruchet

About the PICO COMPUTER PCB

PICO COMPUTER is an open source AVR/Arduino PCB design by Scruchet, published on GitHub. It is a 2-layer board measuring 85.5 × 51 mm, with 64 components from 32 distinct parts.

Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the AT45DB641E-SHN2B-T, LM358, AMS1117-5.0, AMS1117 and 74LVC125. By type, the board carries 20 resistors, 14 capacitors, 9 connectors, 9 diodes, 7 ICs and 2 LEDs.

It belongs with the displays & leds and usb & debug tools designs in this gallery.

From the project

Little computer working with an Atmega328p

Welcome to my PICO Computer project repository. This section consolidates all the source files written in the C language used by my motherboard, as well as the electronic components created with KiCad. The primary goal of this project is to create a motherboard that can be connected to other boards (screen, keyboard, network) to build a Pico Computer.

This section includes all the source files written in the C language used by my motherboard. In addition to the source files, there is also a test folder to demonstrate various evaluations performed during the project's development.

Main components on the PICO COMPUTER

PICO COMPUTER bill of materials (BOM)

64 components, 32 distinct parts.

QtyPartRefs
1
AT45DB641E-SHN2B-T
IC1
1
ATmega328P-A
U1
1
LM358
U2
1
AMS1117-5.0
U3
1
AMS1117
U4
1
74LVC125
U5
1
FT232RL
U6
1
FDN340P
Q1
1
16MHz
Y1
1
Barrel_Jack_Switch_Pin3Ring
J1
1
AVR-ISP-6
J2
1
Conn_01x02_Socket
J3
5
Conn_02x04_Counter_Clockwise
J4, J5, J6, J7, J8
1
USB_MINI-B_SMT
J9
1
MOMENTARY-SWITCH-SPST-2-SMD-5.2MM
S1
2
LED
RX1, TX1
8
LED
D1, D6, D8, D9, D10, D11, D12, D13
1
D
D7
6
100nF
C1, C8, C9, C12, C13, C14
1
C
C2
Show 12 more
QtyPartRefs
2
22pF
C3, C4
1
4.7µF
C5
2
47µF
C6, C11
2
1µF
C7, C10
1
1MΩ
R1
1
10KΩ
R2
3
500Ω
R3, R8, R9
2
22Ω
R4, R5
2
10k
R6, R7
1
1kΩ
R10
6
1k
R11, R12, R13, R14, R15, R16
4
3.3k
R17, R18, R19, R20

PICO COMPUTER design files

The KiCad project lives in the Scruchet/PICO_COMPUTER repository on GitHub; these links point at the commit this page was built from.

PICO COMPUTER: common questions

What microcontroller does the PICO COMPUTER use?

The PICO COMPUTER is built around the ATmega328P-A, from the AVR/Arduino family.

How big is the PICO COMPUTER PCB?

The PICO COMPUTER measures 85.5 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PICO COMPUTER?

64 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the PICO COMPUTER design files?

From the Scruchet/PICO_COMPUTER repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PICO COMPUTER design in my own project?

The repository has no license, so all rights stay with Scruchet. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PICO COMPUTER without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards