ESP32-C3Devboard
Sealflux·ESP32-C3Devboard·PCB/ESP32-C3Devboard.kicad_pcb
About the ESP32-C3Devboard PCB
ESP32-C3Devboard is an open source ESP32 PCB design by Sealflux, published on GitHub under the MIT license. It is a 2-layer board measuring 21 × 31 mm, with 28 components from 15 distinct parts.
Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the W25Q16JVUXIQ, H7233-1 and TP4056-42-ESOP8. By type, the board carries 9 capacitors, 9 resistors, 4 ICs, 3 connectors, 2 switches and 1 battery holder.
It belongs with the dev boards & breakouts, iot & wireless and power & battery designs in this gallery.
From the project
Custom ESP32-C3 Devboard

Main components on the ESP32-C3Devboard
ESP32-C3Devboard bill of materials (BOM)
28 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3 | QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | W25Q16JVUXIQ Winbond(华邦) | USON-8_L3.0-W2.0-P0.50-BL-EP | U2 |
| 1 | H7233-1 H7233-1_C277859 Siproin(上海矽朋) | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U3 |
| 1 | TP4056-42-ESOP8 TP4056 TOPPOWER(南京拓微) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J2, J3 |
| 1 | Battery_Cell | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 2 | SW_Push | KEY-SMD_B3U-1000PM | SW1, SW2 |
| 4 | CC0402KRX7R7BB104 100nF YAGEO(国巨) | C0402 | C1, C5, C6, C7 |
| 4 | CL10A106MP8NNNC 10uF SAMSUNG(三星) | C0603 | C2, C3, C4, C9 |
| 1 | CL10B105KA8NNNC 100nF SAMSUNG(三星) | C0402 | C8 |
| 2 | FRC0603F1001TS 1kΩ FOJAN(富捷) | R0603 | R1, R11 |
| 4 | RC0402FR-0710KL 10kΩ YAGEO(国巨) | R0402 | R2, R8, R9, R10 |
| 2 | FRC0603F5101TS 5.1kΩ FOJAN(富捷) | R0603 | R3, R4 |
| 1 | FRC0402F2201TS 2.2kΩ FOJAN(富捷) | R0402 | R6 |
ESP32-C3Devboard design files
The KiCad project lives in the Sealflux/ESP32-C3Devboard repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/ESP32-C3Devboard.kicad_pcb
- SchematicPCB/ESP32-C3Devboard.kicad_sch
ESP32-C3Devboard: common questions
What microcontroller does the ESP32-C3Devboard use?
The ESP32-C3Devboard is built around the ESP32-C3, from the ESP32 family.
How big is the ESP32-C3Devboard PCB?
The ESP32-C3Devboard measures 21 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-C3Devboard?
28 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-C3Devboard design files?
From the Sealflux/ESP32-C3Devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32-C3Devboard design in my own project?
Yes, under the terms of its MIT license, which Sealflux chose for the repository.
Can I test firmware for the ESP32-C3Devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k