RP2350B QFN-80 Minimal Design Example

sequoia-hope·circuit-composer·packages/rp2350/layouts/qfn80-4layer/fixture.kicad_pcb

RP2350B QFN-80 Minimal Design Example PCB layout, top view — open source RP2040/RP2350 board by sequoia-hope

About the RP2350B QFN-80 Minimal Design Example PCB

RP2350B QFN-80 Minimal Design Example is an open source RP2040/RP2350 PCB design by sequoia-hope, published on GitHub under the MIT license. It is a 4-layer board measuring 52 × 71.5 mm, with 4 components from 3 distinct parts.

Its main chip is the RP2350_80QFN, from the RP2040/RP2350 family. By type, the board carries 2 capacitors, 1 IC and 1 inductor.

From the project

Board design as composition: verified chip packages, intent files and generated critical blocks for KiCad, between easy_pcb and ultraroute

A Circuit Composer package for the Raspberry Pi RP2350 family: RP2350A (QFN-60) and RP2350B (QFN-80). The core voltage regulator has generated, verified layouts for both packages on 2 and 4 layers. The crystal, USB, QSPI flash, buttons and decoupling are intent blocks with cited rules and with measurements taken from Raspberry Pi's two minimal boards.

The two packages keep the same pin names; numbers differ. The regulator's pins 47–50 on QFN-60 are 62–65 on QFN-80, in the same order (PGND, LX, VIN, FB). The QFN-80 adds 18 GPIOs, four of them ADC inputs, and two more IOVDD pins. To compose a…

Main components on the RP2350B QFN-80 Minimal Design Example

RP2350B QFN-80 Minimal Design Example bill of materials (BOM)

4 components, 3 distinct parts.

QtyPartRefs
1
RP2350_80QFN
U203
1
3.3u
L201
2
4.7u
C216, C217

RP2350B QFN-80 Minimal Design Example design files

The KiCad project lives in the sequoia-hope/circuit-composer repository on GitHub; these links point at the commit this page was built from.

RP2350B QFN-80 Minimal Design Example: common questions

What microcontroller does the RP2350B QFN-80 Minimal Design Example use?

The RP2350B QFN-80 Minimal Design Example is built around the RP2350_80QFN, from the RP2040/RP2350 family.

How big is the RP2350B QFN-80 Minimal Design Example PCB?

The RP2350B QFN-80 Minimal Design Example measures 52 × 71.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RP2350B QFN-80 Minimal Design Example?

4 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the RP2350B QFN-80 Minimal Design Example design files?

From the sequoia-hope/circuit-composer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the RP2350B QFN-80 Minimal Design Example design in my own project?

Yes, under the terms of its MIT license, which sequoia-hope chose for the repository.

Can I test firmware for the RP2350B QFN-80 Minimal Design Example without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in circuit-composer

Similar boards