Easy2350

sequoia-hope·circuit-composer·boards/easy2350/input/easy2350.kicad_pcb

Easy2350 PCB layout, top view — open source RP2040/RP2350 board by sequoia-hope

About the Easy2350 PCB

Easy2350 is an open source RP2040/RP2350 PCB design by sequoia-hope, published on GitHub under the MIT license. It is a 4-layer board measuring 21 × 51 mm, with 54 components from 27 distinct parts.

Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the USBLC6-2SC6, AP7361C-33FGE-7, SN74LV1T125DBVR and W25Q128JVSIQ. By type, the board carries 25 capacitors, 12 resistors, 7 diodes, 5 ICs, 2 switches and 1 crystal.

It belongs with the power & battery designs in this gallery.

From the project

Board design as composition: verified chip packages, intent files and generated critical blocks for KiCad, between easy_pcb and ultraroute

Board design as composition: chips are ingested once into verified, published packages, and boards are built by combining them. It covers the stage between schematic and routing: constraint definition and physical design planning. The full design is in Circuit Composer — System Spec.md.

- easypcb runs a board from requirements to fab outputs with the pcb-design skill. Its phase-3 classification (design/nets.csv) imports into an intent file, and its worked example, easy2350, is the first annotated board here. - ultraroute** is the router. It takes this project's output: a KiCad board with…

Main components on the Easy2350

Easy2350 bill of materials (BOM)

54 components, 27 distinct parts.

QtyPartRefs
1
RP2350A
Raspberry Pi
U1
1
USBLC6-2SC6
STMicroelectronics
U2
1
AP7361C-33FGE-7
AP7361C-33FGE
Diodes Incorporated
U3
1
SN74LV1T125DBVR
Texas Instruments
U4
1
W25Q128JVSIQ
Winbond
U5
1
ABM8-272-T3
12MHz
Abracon
Y1
1
TYPE-C-31-M-12
USB-C
Korean Hroparts Elec
J1
1
TS-1088-AR02016
BOOTSEL
XUNPU
SW1
1
TS-1088-AR02016
RESET
XUNPU
SW2
1
KT-0603R
RED
Hubei KENTO Elec
D1
1
SM4007PL
MDD
D2
4
WS2812B-2020-V6
Worldsemi
D3, D4, D5, D6
1
BZT52B5V1
R+O
D7
1
AOTA-B201610S3R3-101-T
3.3u
Abracon
L1
16
CL05B104KO5NNNC
100n
Samsung Electro-Mechanics
C1, C4, C5, C6, C7, C8, C9, C11 +8
1
CL10A225KO8NNNC
2.2u
Samsung Electro-Mechanics
C2
1
CL21A106KAYNNNE
10u
Samsung Electro-Mechanics
C3
2
CL05A475MP5NRNC
4.7u
Samsung Electro-Mechanics
C13, C16
2
CL05A475MP5NRNC
4.7u
Samsung Electro-Mechanics
C14, C15
2
0402CG150J500NT
15p
FH
C20, C21
Show 7 more
QtyPartRefs
1
CL10A475KO8NNNC
4.7u
Samsung Electro-Mechanics
C23
2
0402WGF5101TCE
5.1k
UNI-ROYAL
R1, R2
2
0402WGF330JTCE
33R
UNI-ROYAL
R3, R10
2
0402WGF270JTCE
27R
UNI-ROYAL
R4, R5
4
0402WGF1001TCE
1k
UNI-ROYAL
R6, R7, R8, R9
1
0402WGF4701TCE
4.7k
UNI-ROYAL
R11
1
0402WGF1003TCE
100k
UNI-ROYAL
R12

Easy2350 design files

The KiCad project lives in the sequoia-hope/circuit-composer repository on GitHub; these links point at the commit this page was built from.

Easy2350: common questions

What microcontroller does the Easy2350 use?

The Easy2350 is built around the RP2350A, from the RP2040/RP2350 family.

How big is the Easy2350 PCB?

The Easy2350 measures 21 × 51 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Easy2350?

54 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Easy2350 design files?

From the sequoia-hope/circuit-composer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Easy2350 design in my own project?

Yes, under the terms of its MIT license, which sequoia-hope chose for the repository.

Can I test firmware for the Easy2350 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in circuit-composer

Similar boards