Rp2350-battery
sequoia-hope·circuit-composer·boards/rp2350-battery/kicad/rp2350-battery.kicad_pcb
About the Rp2350-battery PCB
Rp2350-battery is an open source RP2040/RP2350 PCB design by sequoia-hope, published on GitHub under the MIT license. It is a 2-layer board measuring 39.2 × 30.9 mm, with 60 components from 36 distinct parts.
Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the MCP73831T-2ACI/OT, LSM6DSOTR, W25Q128JVS and TLV62569DBVR. By type, the board carries 23 capacitors, 20 resistors, 5 ICs, 3 connectors, 3 diodes and 2 switches.
It belongs with the power & battery designs in this gallery.
From the project
Board design as composition: verified chip packages, intent files and generated critical blocks for KiCad, between easy_pcb and ultraroute
Board design as composition: chips are ingested once into verified, published packages, and boards are built by combining them. It covers the stage between schematic and routing: constraint definition and physical design planning. The full design is in Circuit Composer — System Spec.md.
- easypcb runs a board from requirements to fab outputs with the pcb-design skill. Its phase-3 classification (design/nets.csv) imports into an intent file, and its worked example, easy2350, is the first annotated board here. - ultraroute** is the router. It takes this project's output: a KiCad board with…
Main components on the Rp2350-battery
Rp2350-battery bill of materials (BOM)
60 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2ACI/OT | SOT-23-5 | U1 |
| 1 | LSM6DSOTR | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | RP2350_60QFN | RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U4 |
| 1 | TLV62569DBVR TLV62569DBV | SOT-23-5 | U5 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | BATT | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | SWD | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 2 | SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 1 | GREEN | LED_0603_1608Metric | D1 |
| 1 | KT-0603R RED | LED_0603_1608Metric | D2 |
| 1 | B5819W | D_SOD-123 | D3 |
| 1 | 3.3u | L_pol_2016 | L1 |
| 1 | SMNR4020-2.2UH 2.2u | L_Sunlord_SWPA4020S | L2 |
| 3 | CL21A106KAYNNNE 10u | C_0805_2012Metric | C1, C2, C22 |
| 2 | CL05B104KO5NNNC 100n | C_0402_1005Metric | C3, C4 |
| 2 | 4.7u | C_0402_1005Metric | C5, C10 |
| 2 | 4.7u | C_0402_1005Metric_small_pads | C6, C9 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 15p | C_0402_1005Metric | C7, C8 |
| 10 | 100n | C_0402_1005Metric | C11, C12, C13, C14, C15, C16, C17, C18 +2 |
| 1 | 0402CG6R8C500NT 6.8p | C_0402_1005Metric | C21 |
| 1 | CL21A226MAQNNNE 22u | C_0805_2012Metric | C23 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 100k | R_0402_1005Metric | R3 |
| 4 | 1k | R_0402_1005Metric | R4, R10, R12, R17 |
| 3 | 0402WGF4701TCE 4.7k | R_0402_1005Metric | R5, R7, R8 |
| 1 | 0402WGF4700TCE 470 | R_0402_1005Metric | R6 |
| 1 | 33 | R_0402_1005Metric | R9 |
| 2 | DNF | R_0402_1005Metric | R11, R14 |
| 1 | 0 | R_0402_1005Metric | R13 |
| 2 | 27 | R_0402_1005Metric | R15, R16 |
| 1 | 0402WGF1003TCE 100k | R_0402_1005Metric | R18 |
| 1 | 0402WGF4533TCE 453k | R_0402_1005Metric | R19 |
| 1 | 0402WGF1004TCE 1M | R_0402_1005Metric | R20 |
Rp2350-battery design files
The KiCad project lives in the sequoia-hope/circuit-composer repository on GitHub; these links point at the commit this page was built from.
Rp2350-battery: common questions
What microcontroller does the Rp2350-battery use?
The Rp2350-battery is built around the RP2350_60QFN, from the RP2040/RP2350 family.
How big is the Rp2350-battery PCB?
The Rp2350-battery measures 39.2 × 30.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rp2350-battery?
60 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rp2350-battery design files?
From the sequoia-hope/circuit-composer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rp2350-battery design in my own project?
Yes, under the terms of its MIT license, which sequoia-hope chose for the repository.
Can I test firmware for the Rp2350-battery without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in circuit-composer
RP2040/RP2350
Best
sequoia-hope
33.7 × 71.8 mm252 parts6LMIT0RP2040/RP2350
Composed
sequoia-hope
60 parts2LMIT0RP2040/RP2350
Placed
sequoia-hope
21.1 × 51.1 mm57 parts2LMIT0RP2040/RP2350
Easy2350-ultraroute-971e723-regions s1
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
Easy2350-ultraroute ad79cd7
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
Easy2350
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
RP2350B QFN-80 Minimal Design Example
sequoia-hope
52 × 71.5 mm4 parts4LMIT0
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k