Easy2350-ultraroute ad79cd7
sequoia-hope·circuit-composer·boards/easy2350/routed/easy2350-ultraroute-ad79cd7.kicad_pcb
About the Easy2350-ultraroute ad79cd7 PCB
Easy2350-ultraroute ad79cd7 is an open source RP2040/RP2350 PCB design by sequoia-hope, published on GitHub under the MIT license. It is a 4-layer board measuring 21 × 51 mm, with 54 components from 27 distinct parts.
Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the USBLC6-2SC6, AP7361C-33FGE-7, SN74LV1T125DBVR and W25Q128JVSIQ. By type, the board carries 25 capacitors, 12 resistors, 7 diodes, 5 ICs, 2 switches and 1 crystal.
From the project
Board design as composition: verified chip packages, intent files and generated critical blocks for KiCad, between easy_pcb and ultraroute
The milestone-3 handoff, end to end: a board whose critical blocks are placed, routed and locked goes to the router, and what comes back is checked against the intent.
Input: ../input/easy2350.kicadpcb (easypcb 2d56198) with its .kicadpro, and the compiled ../compiled/easy2350.kicaddru. 232 locked tracks and vias, among them RP2350's regulator block, transplanted from Raspberry Pi's layout.
Main components on the Easy2350-ultraroute ad79cd7
Easy2350-ultraroute ad79cd7 bill of materials (BOM)
54 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350A Raspberry Pi | RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U2 |
| 1 | AP7361C-33FGE-7 AP7361C-33FGE Diodes Incorporated | DFN-8-1EP_3x3mm_P0.65mm_EP1.5x2.25mm_ThermalVias | U3 |
| 1 | SN74LV1T125DBVR Texas Instruments | SOT-23-5 | U4 |
| 1 | W25Q128JVSIQ Winbond | SOIC-8_5.3x5.3mm_P1.27mm | U5 |
| 1 | ABM8-272-T3 12MHz Abracon | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 USB-C Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | TS-1088-AR02016 BOOTSEL XUNPU | SW_SPST_TS-1088-xR020 | SW1 |
| 1 | TS-1088-AR02016 RESET XUNPU | SW_SPST_TS-1088-xR020 | SW2 |
| 1 | KT-0603R RED Hubei KENTO Elec | LED_0603_1608Metric | D1 |
| 1 | SM4007PL MDD | D_SOD-123F_MDD | D2 |
| 4 | WS2812B-2020-V6 Worldsemi | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D3, D4, D5, D6 |
| 1 | BZT52B5V1 R+O | D_SOD-123 | D7 |
| 1 | AOTA-B201610S3R3-101-T 3.3u Abracon | L_pol_2016 | L1 |
| 16 | CL05B104KO5NNNC 100n Samsung Electro-Mechanics | C_0402_1005Metric | C1, C4, C5, C6, C7, C8, C9, C11 +8 |
| 1 | CL10A225KO8NNNC 2.2u Samsung Electro-Mechanics | C_0603_1608Metric | C2 |
| 1 | CL21A106KAYNNNE 10u Samsung Electro-Mechanics | C_0805_2012Metric | C3 |
| 2 | CL05A475MP5NRNC 4.7u Samsung Electro-Mechanics | C_0402_1005Metric | C13, C16 |
| 2 | CL05A475MP5NRNC 4.7u Samsung Electro-Mechanics | C_0402_1005Metric_small_pads | C14, C15 |
| 2 | 0402CG150J500NT 15p FH | C_0402_1005Metric | C20, C21 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL10A475KO8NNNC 4.7u Samsung Electro-Mechanics | C_0603_1608Metric | C23 |
| 2 | 0402WGF5101TCE 5.1k UNI-ROYAL | R_0402_1005Metric | R1, R2 |
| 2 | 0402WGF330JTCE 33R UNI-ROYAL | R_0402_1005Metric | R3, R10 |
| 2 | 0402WGF270JTCE 27R UNI-ROYAL | R_0402_1005Metric | R4, R5 |
| 4 | 0402WGF1001TCE 1k UNI-ROYAL | R_0402_1005Metric | R6, R7, R8, R9 |
| 1 | 0402WGF4701TCE 4.7k UNI-ROYAL | R_0402_1005Metric | R11 |
| 1 | 0402WGF1003TCE 100k UNI-ROYAL | R_0402_1005Metric | R12 |
Easy2350-ultraroute ad79cd7 design files
The KiCad project lives in the sequoia-hope/circuit-composer repository on GitHub; these links point at the commit this page was built from.
Easy2350-ultraroute ad79cd7: common questions
What microcontroller does the Easy2350-ultraroute ad79cd7 use?
The Easy2350-ultraroute ad79cd7 is built around the RP2350A, from the RP2040/RP2350 family.
How big is the Easy2350-ultraroute ad79cd7 PCB?
The Easy2350-ultraroute ad79cd7 measures 21 × 51 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Easy2350-ultraroute ad79cd7?
54 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Easy2350-ultraroute ad79cd7 design files?
From the sequoia-hope/circuit-composer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Easy2350-ultraroute ad79cd7 design in my own project?
Yes, under the terms of its MIT license, which sequoia-hope chose for the repository.
Can I test firmware for the Easy2350-ultraroute ad79cd7 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in circuit-composer
RP2040/RP2350
Best
sequoia-hope
33.7 × 71.8 mm252 parts6LMIT0RP2040/RP2350
Rp2350-battery
sequoia-hope
39.2 × 30.9 mm60 parts2LMIT0RP2040/RP2350
Composed
sequoia-hope
60 parts2LMIT0RP2040/RP2350
Placed
sequoia-hope
21.1 × 51.1 mm57 parts2LMIT0RP2040/RP2350
Easy2350-ultraroute-971e723-regions s1
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
Easy2350
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
RP2350B QFN-80 Minimal Design Example
sequoia-hope
52 × 71.5 mm4 parts4LMIT0
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k