Composed
sequoia-hope·circuit-composer·boards/rp2350-battery/composed.kicad_pcb
About the Composed PCB
Composed is an open source RP2040/RP2350 PCB design by sequoia-hope, published on GitHub under the MIT license. It is a 2-layer board, with 60 components from 36 distinct parts.
Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the MCP73831T-2ACI/OT, LSM6DSOTR, W25Q128JVS and TLV62569DBVR. By type, the board carries 23 capacitors, 20 resistors, 5 ICs, 3 connectors, 3 diodes and 2 switches.
It belongs with the power & battery designs in this gallery.
From the project
Board design as composition: verified chip packages, intent files and generated critical blocks for KiCad, between easy_pcb and ultraroute
Board design as composition: chips are ingested once into verified, published packages, and boards are built by combining them. It covers the stage between schematic and routing: constraint definition and physical design planning. The full design is in Circuit Composer — System Spec.md.
- easypcb runs a board from requirements to fab outputs with the pcb-design skill. Its phase-3 classification (design/nets.csv) imports into an intent file, and its worked example, easy2350, is the first annotated board here. - ultraroute** is the router. It takes this project's output: a KiCad board with…
Main components on the Composed
Composed bill of materials (BOM)
60 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2ACI/OT | SOT-23-5 | U1 |
| 1 | LSM6DSOTR | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | RP2350_60QFN | RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U4 |
| 1 | TLV62569DBVR TLV62569DBV | SOT-23-5 | U5 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | BATT | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | SWD | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 2 | SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 1 | GREEN | LED_0603_1608Metric | D1 |
| 1 | KT-0603R RED | LED_0603_1608Metric | D2 |
| 1 | B5819W | D_SOD-123 | D3 |
| 1 | 3.3u | L_pol_2016 | L1 |
| 1 | SMNR4020-2.2UH 2.2u | L_Sunlord_SWPA4020S | L2 |
| 3 | CL21A106KAYNNNE 10u | C_0805_2012Metric | C1, C2, C22 |
| 2 | CL05B104KO5NNNC 100n | C_0402_1005Metric | C3, C4 |
| 2 | 4.7u | C_0402_1005Metric | C5, C10 |
| 2 | 4.7u | C_0402_1005Metric_small_pads | C6, C9 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 15p | C_0402_1005Metric | C7, C8 |
| 10 | 100n | C_0402_1005Metric | C11, C12, C13, C14, C15, C16, C17, C18 +2 |
| 1 | 0402CG6R8C500NT 6.8p | C_0402_1005Metric | C21 |
| 1 | CL21A226MAQNNNE 22u | C_0805_2012Metric | C23 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 100k | R_0402_1005Metric | R3 |
| 4 | 1k | R_0402_1005Metric | R4, R10, R12, R17 |
| 3 | 0402WGF4701TCE 4.7k | R_0402_1005Metric | R5, R7, R8 |
| 1 | 0402WGF4700TCE 470 | R_0402_1005Metric | R6 |
| 1 | 33 | R_0402_1005Metric | R9 |
| 2 | DNF | R_0402_1005Metric | R11, R14 |
| 1 | 0 | R_0402_1005Metric | R13 |
| 2 | 27 | R_0402_1005Metric | R15, R16 |
| 1 | 0402WGF1003TCE 100k | R_0402_1005Metric | R18 |
| 1 | 0402WGF4533TCE 453k | R_0402_1005Metric | R19 |
| 1 | 0402WGF1004TCE 1M | R_0402_1005Metric | R20 |
Composed design files
The KiCad project lives in the sequoia-hope/circuit-composer repository on GitHub; these links point at the commit this page was built from.
Composed: common questions
What microcontroller does the Composed use?
The Composed is built around the RP2350_60QFN, from the RP2040/RP2350 family.
How big is the Composed PCB?
The Composed has 2 copper layers and is 1.6 mm thick.
How many components are on the Composed?
60 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Composed design files?
From the sequoia-hope/circuit-composer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Composed design in my own project?
Yes, under the terms of its MIT license, which sequoia-hope chose for the repository.
Can I test firmware for the Composed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in circuit-composer
RP2040/RP2350
Best
sequoia-hope
33.7 × 71.8 mm252 parts6LMIT0RP2040/RP2350
Rp2350-battery
sequoia-hope
39.2 × 30.9 mm60 parts2LMIT0RP2040/RP2350
Placed
sequoia-hope
21.1 × 51.1 mm57 parts2LMIT0RP2040/RP2350
Easy2350-ultraroute-971e723-regions s1
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
Easy2350-ultraroute ad79cd7
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
Easy2350
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
RP2350B QFN-80 Minimal Design Example
sequoia-hope
52 × 71.5 mm4 parts4LMIT0
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k