ES-Autologger
serhaturtis·ES-Autologger·project/autologger.kicad_pcb
About the ES-Autologger PCB
ES-Autologger is an open source ESP32 PCB design by serhaturtis, published on GitHub. It is a 2-layer board measuring 67.3 × 85.7 mm, with 78 components from 43 distinct parts.
Its main chip is the ESP32-WROOM, from the ESP32 family. Other key parts include the SN65HVD234, STM32F103C8Tx, MAX3485, LM2576S-ADJ and W25Q32JVSS. By type, the board carries 29 resistors, 22 capacitors, 9 connectors, 7 ICs, 7 diodes and 2 inductors.
It belongs with the iot & wireless designs in this gallery.
From the project
A data logger board for an automotive application
This is a board for logging and controlling CAN & RS485 communications with an ESP32 module on board for remote connection.

Main components on the ES-Autologger
ES-Autologger bill of materials (BOM)
78 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN65HVD234 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | MAX3485 | SO-8_5.3x6.2mm_P1.27mm | U3 |
| 1 | LM2576S-ADJ | TO-263-5_TabPin3 | U4 |
| 1 | W25Q32JVSS | SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | ESP32-WROOM | ESP32-WROOM | U6 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | 8MHz 16pF | Crystal_SMD_HC49-SD | Y1 |
| 1 | USB_B_Mini | USB_Mini-B_Lumberg_2486_01_Horizontal | J1 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_bornier-3_P5.08mm | J2, J3 |
| 1 | Conn_01x04_Female | PinHeader_1x04_P1.27mm_Vertical | J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | J6 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P1.27mm_Vertical | J7 |
| 1 | Conn_01x14 | PinHeader_1x14_P1.27mm_Vertical | J9 |
| 1 | Conn_01x21 | PinHeader_1x21_P1.27mm_Vertical | J10 |
| 1 | SW_SPST | SW_SPST_TL3342 | SW1 |
| 4 | D_TVS | D_SMA | D1, D2, D3, D4 |
| 1 | 1N5823-SSXX | D_SMA | D5 |
| 1 | 1N4001-M1-S1A | D_SMA | D6 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRN | D_0805_2012Metric | D7 |
| 1 | ACT45B-510-2P-TL003 | L_CommonMode_Wuerth_WE-SL2 | L1 |
| 1 | 68uH 3.5A | L_12x12mm_H8mm | L2 |
| 10 | 100nF | C_0805_2012Metric | C1, C6, C9, C11, C12, C13, C14, C16 +2 |
| 3 | 22pF | C_0805_2012Metric | C2, C3, C4 |
| 3 | 10uF | C_0805_2012Metric | C5, C19, C21 |
| 3 | 100pF | C_0805_2012Metric | C7, C8, C10 |
| 1 | 100uF | CP_Elec_8x10 | C15 |
| 1 | 1000uF | CP_Elec_10x10.5 | C17 |
| 1 | 22uF | C_0805_2012Metric | C22 |
| 4 | 200R | R_0805_2012Metric | R1, R3, R4, R5 |
| 2 | 4K7 | R_0805_2012Metric | R2, R18 |
| 1 | 1M | R_0805_2012Metric | R6 |
| 2 | 60R | R_0805_2012Metric | R7, R8 |
| 5 | 10K | R_0805_2012Metric | R9, R10, R11, R12, R28 |
| 2 | R | R_0805_2012Metric | R13, R14 |
| 1 | 120R | R_0805_2012Metric | R15 |
| 2 | 20R | R_0805_2012Metric | R16, R17 |
| 2 | 3K3 | R_0805_2012Metric | R19, R20 |
| 1 | 2K7 | R_0805_2012Metric | R21 |
| 1 | 1K6 | R_0805_2012Metric | R22 |
| 5 | 100R | R_0805_2012Metric | R23, R24, R25, R26, R27 |
| 1 | 330R | R_0805_2012Metric | R29 |
ES-Autologger design files
The KiCad project lives in the serhaturtis/ES-Autologger repository on GitHub; these links point at the commit this page was built from.
- Layoutproject/autologger.kicad_pcb
- Schematicproject/autologger.kicad_sch
ES-Autologger: common questions
What microcontroller does the ES-Autologger use?
The ES-Autologger is built around the ESP32-WROOM, from the ESP32 family.
How big is the ES-Autologger PCB?
The ES-Autologger measures 67.3 × 85.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ES-Autologger?
78 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the ES-Autologger design files?
From the serhaturtis/ES-Autologger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ES-Autologger design in my own project?
The repository has no license, so all rights stay with serhaturtis. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ES-Autologger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k