HardLabs

Pmw3360 pcb ffc

sfunderbots·Electrical·pmw3360-pcb-main/pmw3360_pcb_ffc/pmw3360_pcb_ffc.kicad_pcb

Pmw3360 pcb ffc layout, top view — open source RP2040/RP2350 board by sfunderbots

About the Pmw3360 pcb ffc

Pmw3360 pcb ffc is an open source RP2040/RP2350 PCB design by sfunderbots, published on GitHub. It is a 2-layer board measuring 27 × 22.5 mm, with 13 components from 12 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP14A0454-E/SN. By type, the board carries 5 capacitors, 4 resistors, 2 ICs, 1 connector and 1 jumper.

From the project

PCB etc.

- J1: 0.5mm 8pin FFC/FPC connector (AFC01-S08FCA-00). - Mounting holes: 4x M2 (∅2.2mm).

- Copper layer count: 2 - Board overall dimensions: 27 mm x 22.5 mm - Min track/spacing: 0.2 mm / 0.2 mm - Min hole diameter: 0.3 mm - Castellated pads: No - Plated board edge: No - Edge card connectors: No

- Changed LDO from TPS73601DBV to TLV74318PDBVR. - Changed R5 to C5.

Main components on the Pmw3360 pcb ffc

RP2040MCP14A0454-E/SN

Pmw3360 pcb ffc bill of materials (BOM)

13 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
PMW3360
U1
1
MCP14A0454-E/SN
TLV74318PDBVR
U2
1
JST_B3B-XH-A
Interface
J1
1
SolderJumper_3_Open
JP1
1
25SVPF100M
4.7uF/10V
C1
1
25SVPF100M
100nF
C2
2
CL31A226KAHNNNE
1uF
C3, C4
1
ESMQ251VSN102MQ45S
22nF
C5
1
0603WAF1003T5E
10k
R1
1
0603WAF1002T5E
10k
R2
1
RMCF0603FT2K49
39R
R3
1
0603WAF1200T5E
28k
R4

Pmw3360 pcb ffc design files

The KiCad project lives in the sfunderbots/Electrical repository on GitHub; these links point at the commit this page was built from.

Pmw3360 pcb ffc: common questions

What microcontroller does the Pmw3360 pcb ffc use?

The Pmw3360 pcb ffc is built around the RP2040, from the RP2040/RP2350 family.

How big is the Pmw3360 pcb ffc?

The Pmw3360 pcb ffc measures 27 × 22.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pmw3360 pcb ffc?

13 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pmw3360 pcb ffc design files?

From the sfunderbots/Electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pmw3360 pcb ffc design in my own project?

The repository has no license, so all rights stay with sfunderbots. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pmw3360 pcb ffc without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Electrical

Similar boards