ESP32 BME680 DevProject
Sharketec2016·ESP32_BME680_DevProject
About the ESP32 BME680 DevProject PCB
ESP32 BME680 DevProject is an open source ESP32 PCB design by Sharketec2016, published on GitHub. It is a 2-layer board measuring 49 × 51.2 mm, with 34 components from 18 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the AMS1117-3.3, USBLC6-2SC6 and CH9102F. By type, the board carries 11 capacitors, 10 resistors, 4 ICs, 3 connectors, 3 diodes and 2 transistors.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
Main components on the ESP32 BME680 DevProject
ESP32 BME680 DevProject bill of materials (BOM)
34 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32D | U3 |
| 1 | CH9102F | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U6 |
| 2 | SS8050 | SOT-23 | Q1, Q2 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | SW_Push | SMD Tactile Button | SW1 |
| 1 | C2286 RED | LED_0603 | D1 |
| 1 | C2288 GREEN | LED_0603 | D2 |
| 1 | C2288 BLUE | LED_0603 | D3 |
| 6 | 10U 10u | C_0603_1608Metric | C1, C2, C4, C6, C8, C11 |
| 5 | 100N 100n | C_0805_2012Metric | C3, C5, C7, C10, C12 |
| 3 | 10K 10k | R_0805_2012Metric | R1, R2, R11 |
| 3 | 1k | R_0805_2012Metric | R3, R4, R10 |
| 2 | 4K7 4k7 | R_0805_2012Metric | R6, R7 |
| 2 | 470 | R_0805_2012Metric | R8, R9 |
ESP32 BME680 DevProject design files
The KiCad project lives in the Sharketec2016/ESP32_BME680_DevProject repository on GitHub; these links point at the commit this page was built from.
ESP32 BME680 DevProject: common questions
What microcontroller does the ESP32 BME680 DevProject use?
The ESP32 BME680 DevProject is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the ESP32 BME680 DevProject PCB?
The ESP32 BME680 DevProject measures 49 × 51.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32 BME680 DevProject?
34 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32 BME680 DevProject design files?
From the Sharketec2016/ESP32_BME680_DevProject repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32 BME680 DevProject design in my own project?
The repository has no license, so all rights stay with Sharketec2016. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 BME680 DevProject without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k