8 open source boards using the CH9102F

Real designs built with the CH9102F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the CH9102F

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the CH9102F connects to, and the resistors, capacitors and other passives placed on it.

  • The SUSPEND pins is left unconnected on 81% of them (a signal on 3).
  • The RI pin is left unconnected on 6 of 8 designs (a signal on 2).
  • The V3 pin has a capacitor to GND on 5 of 8 designs, most often 100 nF (then 4.7 µF).
  • The ACT pin is left unconnected on 6 of 8 designs (a signal on 2).
RIpin 1Connected to: Not connected 75% · a signal 25%
GNDpin 2, 25Connected to: GND 75% · a signal 25%
VIOpin 5Connected to: 3.3V 50% · a signal 38%
  • Decoupling capacitor on 50% · 100 nF (8)
V3pin 6Connected to: Signal 75%
  • Capacitor to GND on 63% · 100 nF (5), 4.7 µF (1), 10 µF (1)
VDD5pin 7Connected to: VBUS 75%
  • Decoupling capacitor on 50% · 1 µF (3), 10 µF (1)
VBUSpin 8Connected to: VBUS 88%
  • Decoupling capacitor on 50% · 1 µF (3), 10 µF (1)
RSTpin 9Connected to: Not connected 63% · a signal 38%
ACTpin 10Connected to: Not connected 75% · a signal 25%
WAKEUP/GPIO.3pin 11Connected to: Not connected 63% · a signal 38%
TNOW/GPIO.2pin 12Connected to: Not connected 63% · a signal 38%
RXS/GPIO.1pin 13Connected to: Not connected 75% · a signal 25%
TXS/GPIO.0pin 14Connected to: Not connected 75% · a signal 25%
SUSPENDpin 15, 17Connected to: Not connected 81% · a signal 19%
GPIO.4pin 16Connected to: Not connected 63% · a signal 38%
CTSpin 18Connected to: Not connected 75% · a signal 25%
RTSpin 19Connected to: A connector 25%
  • Series resistor on 63% · 10 kΩ (4), 4.7 kΩ (1)
DSRpin 22Connected to: Not connected 75% · a signal 25%
DTRpin 23Connected to: A connector 38%
  • Series resistor on 63% · 10 kΩ (4), 4.7 kΩ (1)
DCDpin 24Connected to: Not connected 75% · a signal 25%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open Source Smart Glasses by Mentra-Community, USB CH9102F by hirakuni45, Fmc usb gpio spi jtag by chipsalliance and GLARE by RR-CREATOR.

The CH9102F in open source designs

The gallery holds 8 open source boards using the CH9102F from 8 GitHub repositories; a typical one measures about 75.8 × 28.6 mm and carries around 80 components.

50% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.

The most starred is Open Source Smart Glasses by Mentra-Community.

Microcontrollers on boards using the CH9102F

CH9102F: common questions

Where can I find a CH9102F reference design?

Each of the 8 boards on this page is a real design using the CH9102F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CH9102F SUSPEND pin connected?

The SUSPEND pins is left unconnected on 81% of them (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the CH9102F.

How is the CH9102F RI pin connected?

The RI pin is left unconnected on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the CH9102F.

How is the CH9102F V3 pin connected?

The V3 pin has a capacitor to GND on 5 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the CH9102F.

What parts are used alongside the CH9102F?

The AP5054HTC, MAX17048, NCP167BMX330TBG, SY7088 and XC61CC3002MR appear in the most repositories here.

Which microcontrollers do boards using the CH9102F use?

Most are built on ESP32 (4) and RP2040/RP2350 (2).

How big is a typical board using the CH9102F?

The median is 75.8 × 28.6 mm, and 50% are two-layer designs.

What is the most popular open source board using the CH9102F?

By GitHub stars, Open Source Smart Glasses by Mentra-Community, with 1,235 stars.

Can I simulate one of these boards using the CH9102F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part