Digit ESP32 2025

SHC-ASTRA·arm-electrical·Digit/Digit.kicad_pcb

Digit ESP32 2025 PCB layout, top view — open source ESP32 board by SHC-ASTRA

About the Digit ESP32 2025 PCB

Digit ESP32 2025 is an open source ESP32 PCB design by SHC-ASTRA, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 47 × 101 mm, with 56 components from 44 distinct parts.

Its main chip is the ESP32 DOIT Devkit V1, from the ESP32 family. Other key parts include the TJA1051T/3, BD622xF, DRV8874 and D24V22F5. By type, the board carries 18 resistors, 13 capacitors, 10 connectors, 7 diodes, 3 ICs and 3 transistors.

From the project

KiCAD files for Socket and Digit

Includes the KiCAD files for the Socket and Digit PCBs; Socket is located at the base of Arm and controls the Arm's main joints, Digit is located at the end of Arm and controls Wrist and End Effector.

Main components on the Digit ESP32 2025

Digit ESP32 2025 bill of materials (BOM)

56 components, 44 distinct parts.

QtyPartRefs
1
TJA1051T/3
U1
1
BD622xF
U2
1
ESP32 DOIT Devkit V1
U3
1
DRV8874
A3
1
D24V22F5
A4
2
SSM3K329R_LF
Q2, Q4
1
PMOS
Q3
1
4s Batt
J1
1
12V
J2
1
VIC CAN
J3
1
Cam 1 Pwr Conn
J6
1
Lynx Servos
J7
1
CAM 2 Pwr Conn
J9
1
Sparkmax Pwr
J12
1
EF Motor, Lin ac, Laser
J13
1
UV Bulb, Sparkmax PWM, Lasers
J15
1
AS7341 or SHT30
J16
1
BATT
D1
1
12V
D2
1
5V
D3
Show 24 more
QtyPartRefs
2
TVS
D4, D9
1
15
D5
1
Inolux_IN-PI554FCH
D8
1
4.7 nF
C1
2
100u
C2, C12
1
100 nF
C3
1
47 nF
C4
2
10u
C5, C13
2
100pF
C6, C7
1
10uF
C8
1
0.1 uF
C9
2
1uF
C10, C11
6
10k
R1, R2, R3, R5, R7, R14
1
R_BATT
R4
1
3.32k
R6
1
2.21k
R8
1
R_12V
R9
1
R_5V
R10
2
60
R11, R12
1
10 kΩ
R13
1
10
R16
1
50k
R17
1
330
R18
1
0Ω
R19

Digit ESP32 2025 design files

The KiCad project lives in the SHC-ASTRA/arm-electrical repository on GitHub; these links point at the commit this page was built from.

Digit ESP32 2025: common questions

What microcontroller does the Digit ESP32 2025 use?

The Digit ESP32 2025 is built around the ESP32 DOIT Devkit V1, from the ESP32 family.

How big is the Digit ESP32 2025 PCB?

The Digit ESP32 2025 measures 47 × 101 mm, has 2 copper layers and is 1.69 mm thick.

How many components are on the Digit ESP32 2025?

56 components, from 44 distinct parts. The full bill of materials is listed on this page.

Where can I download the Digit ESP32 2025 design files?

From the SHC-ASTRA/arm-electrical repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Digit ESP32 2025 design in my own project?

Yes, under the terms of its AGPL-3.0 license, which SHC-ASTRA chose for the repository.

Can I test firmware for the Digit ESP32 2025 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in arm-electrical

Similar boards