3 open source boards using the DRV8874
Real designs built with the DRV8874, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
LizardBot1 ProjectFiles
lizard-electronics
130 × 90 mm125 parts4LApache-2.01RP2040/RP2350
TMC-LZ210-Command-Station
tmc-digiboys
180 × 90 mm110 parts2LCERN-OHL-P-2.00ESP32
Digit ESP32 2025
SHC-ASTRA
47 × 101 mm56 parts2LAGPL-3.00
The DRV8874 in open source designs
The gallery holds 3 open source boards using the DRV8874 from 3 GitHub repositories; a typical one measures about 130 × 90 mm and carries around 110 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is LizardBot1 ProjectFiles by lizard-electronics.
Microcontrollers on boards using the DRV8874
What boards using the DRV8874 are built for
DRV8874: common questions
Where can I find a DRV8874 reference design?
Each of the 3 boards on this page is a real design using the DRV8874. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DRV8874 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the DRV8874?
The median is 130 × 90 mm, and 67% are two-layer designs.
What is the most popular open source board using the DRV8874?
By GitHub stars, LizardBot1 ProjectFiles by lizard-electronics, with 1 stars.
Can I simulate one of these boards using the DRV8874 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.