Custom Esp32 Devboard
shreyD2408·Custom_Esp32_Devboard·hardware/ESP32 Custom Devboard.kicad_pcb
About the Custom Esp32 Devboard PCB
Custom Esp32 Devboard is an open source ESP32 PCB design by shreyD2408, published on GitHub. It is a 4-layer board measuring 84 × 72 mm, with 55 components from 30 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the MAX98357A, LM1117-3.3, USBLC6-2SC6 and DRV8833PW. By type, the board carries 20 capacitors, 10 resistors, 8 connectors, 6 ICs, 5 diodes and 4 switches.
It belongs with the dev boards & breakouts, robotics & motion and audio designs in this gallery.
From the project
This project is a custom ESP32-S3 development board designed for robotics and embedded systems. It integrates two DRV8833 motor drivers, an MPU6050 accelerometer and gyroscope, a MAX98357A audio amplifier, and connections for up to six servos. It also includes USB-C programming,
This project is a custom ESP32-S3 development board designed for robotics and embedded systems. It integrates two DRV8833 motor drivers, an MPU6050 accelerometer and gyroscope, a MAX98357A audio amplifier, and connections for up to six servos. It also includes USB-C programming, power inputs, and accessible GPIO, ADC, and I2C pins for connecting external components.
Main components on the Custom Esp32 Devboard
Custom Esp32 Devboard bill of materials (BOM)
55 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U2 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U3 |
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 2 | DRV8833PW | TSSOP-16_4.4x5mm_P0.65mm | U6, U7 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
| 1 | 5V_IN 5v_IN | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J13 |
| 1 | 5V_OUT | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J15 |
| 1 | GND_OUT | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J16 |
| 2 | MOTOR1 Motor1 | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J21, J22 |
| 2 | MOTOR2 Motor2 | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J23, J24 |
| 1 | Polyfuse 1A | Fuse_1206_3216Metric | F1 |
| 1 | BOOT | SW_SPST_EVQP2_ShortPushTravel_H2.1mm | SW1 |
| 1 | RESET | SW_SPST_EVQP2_ShortPushTravel_H2.1mm | SW2 |
| 1 | USER_SW1 | SW_SPST_EVQP2_ShortPushTravel_H2.1mm | SW3 |
| 1 | USER_SW2 | SW_SPST_EVQP2_ShortPushTravel_H2.1mm | SW4 |
| 4 | ESD3.3 | D_SOD-923 | D1, D2, D5, D6 |
| 1 | GREEN | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D4 |
| 1 | BLM21PG220 | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 3 | 1u | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1, C19, C20 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10U 10u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C13, C14 |
| 7 | 0.1U 0.1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C5, C6, C7, C8, C17, C18 |
| 3 | 2.2U 2.2u | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C4, C11, C12 |
| 2 | 22U 22u | C_1825_4564Metric_Pad1.57x6.80mm_HandSolder | C9, C10 |
| 2 | 0.01U 0.01u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15, C16 |
| 4 | 10K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R9, R10 |
| 2 | 2K2 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 2 | 5.1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6 |
| 1 | 1M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
Custom Esp32 Devboard design files
The KiCad project lives in the shreyD2408/Custom_Esp32_Devboard repository on GitHub; these links point at the commit this page was built from.
Custom Esp32 Devboard: common questions
What microcontroller does the Custom Esp32 Devboard use?
The Custom Esp32 Devboard is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the Custom Esp32 Devboard PCB?
The Custom Esp32 Devboard measures 84 × 72 mm, has 4 copper layers and is 2.044 mm thick.
How many components are on the Custom Esp32 Devboard?
55 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Custom Esp32 Devboard design files?
From the shreyD2408/Custom_Esp32_Devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Custom Esp32 Devboard design in my own project?
The repository has no license, so all rights stay with shreyD2408. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Custom Esp32 Devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k