KickController
Shubhkr08·KickController·Kick Controller/PCB/KICKController.kicad_pcb
About the KickController PCB
KickController is an open source STM32 PCB design by Shubhkr08, published on GitHub. It is a 4-layer board measuring 51.4 × 51.4 mm, with 64 components from 30 distinct parts.
Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the AP63203WU, USBLC6-2SC6, MPU-6050, ICM-20948 and LD39015M18R. By type, the board carries 31 capacitors, 8 ICs, 7 connectors, 7 resistors, 3 diodes and 3 inductors.
From the project
This a 4 layer PCB. In the manufacturing folder, the Gerber, BOM, and position files are available for fabricating the PCB. Parts used are JLCPCB compatible.
Main components on the KickController
KickController bill of materials (BOM)
64 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGTX STM32F405RGTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AP63203WU | TSOT-23-6 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | ICM-20948 | InvenSense_QFN-24_3x3mm_P0.4mm | U5 |
| 1 | LD39015M18R | SOT-23-5 | U6 |
| 1 | NTS0104PW | TSSOP-14_4.4x5mm_P0.65mm | U7 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U8 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 16MHZ 16Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 4 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J1, J3, J4, J5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J7 |
| 1 | C20798 500 mA | Fuse_0603_1608Metric | F1 |
| 2 | TS-1187A-B-A-B | SW_TS-1187A-B-A-B | S1, S2 |
| 2 | LED | LED_0603_1608Metric | D1, D3 |
| 1 | B5819W b5819w | D_SOD-123 | D2 |
| 2 | 100R | L_0805_2012Metric | FB1, FB2 |
| 1 | 3.9UH 3.9uH | L_Sunlord_SWPA4030S | L1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10U 10u | C_0603_1608Metric | C1, C9, C17, C28, C29 |
| 16 | 100N 100n | C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C10 +8 |
| 2 | 10P 10p | C_0603_1608Metric | C11, C12 |
| 4 | 2U2 2u2 | C_0603_1608Metric | C13, C14, C15, C16 |
| 1 | 100N 100n | C_0805_2012Metric | C18 |
| 2 | 22U 22u | C_0805_2012Metric | C19, C20 |
| 1 | 2N2 2n2 | C_0603_1608Metric | C24 |
| 1 | 10K 10k | R_0603_1608Metric | R1 |
| 4 | 2K2 2k2 | R_0603_1608Metric | R2, R3, R5, R6 |
| 2 | 1k | R_0603_1608Metric | R4, R7 |
KickController design files
The KiCad project lives in the Shubhkr08/KickController repository on GitHub; these links point at the commit this page was built from.
KickController: common questions
What microcontroller does the KickController use?
The KickController is built around the STM32F405RGTX, from the STM32 family.
How big is the KickController PCB?
The KickController measures 51.4 × 51.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the KickController?
64 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the KickController design files?
From the Shubhkr08/KickController repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the KickController design in my own project?
The repository has no license, so all rights stay with Shubhkr08. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the KickController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k