6 open source boards using the LD39015M18R

Real designs built with the LD39015M18R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the LD39015M18R

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LD39015M18R connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin is tied to 3.3V on 6 of 6 designs.
  • The EN pin is tied to 3.3V on 6 of 6 designs.
  • The OUT pin is tied to 1.8V on 6 of 6 designs.
INpin 1Connected to: 3.3V 100%
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 3.3V 100%
NCpin 4Connected to: Not connected 100%
OUTpin 5Connected to: 1.8V 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hermes-FlightController by aadilnaji, Hackydrone by 0xmanidev, HermesFC by Daksh-Saksena and ANC by Poojaa-Rangaiah.

The LD39015M18R in open source designs

The gallery holds 6 open source boards using the LD39015M18R from 6 GitHub repositories; a typical one measures about 51.4 × 51.3 mm and carries around 64 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Hermes-FlightController by aadilnaji.

Microcontrollers on boards using the LD39015M18R

What boards using the LD39015M18R are built for

LD39015M18R: common questions

Where can I find a LD39015M18R reference design?

Each of the 6 boards on this page is a real design using the LD39015M18R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LD39015M18R IN pin connected?

The IN pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LD39015M18R.

How is the LD39015M18R EN pin connected?

The EN pin is tied to 3.3V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LD39015M18R.

How is the LD39015M18R OUT pin connected?

The OUT pin is tied to 1.8V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LD39015M18R.

What parts are used alongside the LD39015M18R?

The AP63203WU, ICM-20948, MPU-6050, BMP280 and NTS0104PW appear in the most repositories here.

Which microcontrollers do boards using the LD39015M18R use?

Most are built on STM32 (5).

How big is a typical board using the LD39015M18R?

The median is 51.4 × 51.3 mm, and 50% are two-layer designs.

What is the most popular open source board using the LD39015M18R?

By GitHub stars, Hermes-FlightController by aadilnaji, with 16 stars.

Can I simulate one of these boards using the LD39015M18R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part