9 open source boards using the ADXL345BCCZ

Real designs built with the ADXL345BCCZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the ADXL345BCCZ

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ADXL345BCCZ connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_I/O pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF).
  • The VS pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 10 µF).
  • The RES pins is left unconnected on 69% of them (GND on 2, 3.3V on 2).
  • The SDA/SDI/SDIO pin has a pull-up to 3.3V on 4 of 8 designs, most often 4.7 kΩ (then 1 kΩ).
VDD_I/Opin 1Connected to: 3.3V 75% · a signal 25%
  • Decoupling capacitor on 75% · 100 nF (7), 10 µF (5), 10 nF (1)
GNDpin 2, 4, 5Connected to: GND 88%
RESpin 3, 11Connected to: Not connected 69%
VSpin 6Connected to: 3.3V 75% · a signal 25%
  • Decoupling capacitor on 63% · 100 nF (5), 10 µF (4), 1 µF (2)
CSpin 7Connected to: The microcontroller 38% · 3.3V 25%
  • Capacitor to GND on 38% · 100 nF (4), 10 µF (2), 1 µF (2)
NCpin 10Connected to: Not connected 100%
SDA/SDI/SDIOpin 13Connected to: The microcontroller 75%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1 kΩ (1), 2.2 kΩ (1)
SCL/SCLKpin 14Connected to: The microcontroller 75%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1 kΩ (1), 2.2 kΩ (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TurboCAN by henrikssn, Toolhead PCB by skuep, LocalTrack by krakrukra and Firefish by pimbongaerts.

The ADXL345BCCZ in open source designs

The gallery holds 9 open source boards using the ADXL345BCCZ from 8 GitHub repositories; a typical one measures about 72 × 80 mm and carries around 55 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is TurboCAN by henrikssn.

Microcontrollers on boards using the ADXL345BCCZ

ADXL345BCCZ: common questions

Where can I find a ADXL345BCCZ reference design?

Each of the 9 boards on this page is a real design using the ADXL345BCCZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ADXL345BCCZ VDD_I/O pin?

The VDD_I/O pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the ADXL345BCCZ.

What decoupling capacitors do designs use on the ADXL345BCCZ VS pin?

The VS pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the ADXL345BCCZ.

How is the ADXL345BCCZ RES pin connected?

The RES pins is left unconnected on 69% of them (GND on 2, 3.3V on 2). Counted from the KiCad layouts of 8 open source designs using the ADXL345BCCZ.

Which microcontrollers do boards using the ADXL345BCCZ use?

Most are built on STM32 (4), NXP (2), ESP32 (1) and Microchip SAM (1).

How big is a typical board using the ADXL345BCCZ?

The median is 72 × 80 mm, and 100% are two-layer designs.

What is the most popular open source board using the ADXL345BCCZ?

By GitHub stars, TurboCAN by henrikssn, with 82 stars.

Can I simulate one of these boards using the ADXL345BCCZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part