Esp av

smkent·pcb·pcb/stackable3/esp-av/esp-av.kicad_pcb

Esp av PCB layout, top view — open source ESP32 board by smkent

About the Esp av PCB

Esp av is an open source ESP32 PCB design by smkent, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 100 × 66 mm, with 145 components from 53 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the USBLC6-2P6, DS8242-33SS3, TPS563201, NC7WZ14P6X and SN74LVC1G157DC. By type, the board carries 42 resistors, 24 LEDs, 16 transistors, 16 capacitors, 15 ICs and 15 connectors.

From the project

PCB designs

A monorepository of my PCB designs created with [KiCAD][kicad] 8.

Custom symbols and footprints are located in [libraries][dir-libraries], which is shared between PCB projects using [${KIPRJMOD}][docs-kiprjmod].

Individual PCB projects (e.g. .kicadpro and friends) are located within within [pcb][dir-pcb] for active projects, or [pcb-archived`][dir-pcb-archived] for archived projects.

Main components on the Esp av

Esp av bill of materials (BOM)

145 components, 53 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2P6
U1
1
DS8242-33SS3
U2
1
TPS563201
U3
2
NC7WZ14P6X
U4, U5
4
SN74LVC1G157DC
U6, U7, U8, U9
1
DY-IRMHA384
U10
2
74HC595
U12, U13
1
MAX809C263NR
U14
1
SN74AHC1G08DC
U15
1
GT0104SC
U16
6
PDNM6ET20V05
Q1, Q7, Q9, Q10, Q15, Q16
4
G2N7002X
Q2, Q8, Q17, Q19
4
SP2301DTS
Q3, Q4, Q5, Q6
2
SP2006KT5
Q11, Q14
1
DC-005
J0
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
8
PJ-327U
J2, J3, J4, J5, J6, J7, J8, J9
2
C7433426
JST SH
J10, J17
1
Pin socket
J11
1
C27636912
Qwiic
J13
Show 33 more
QtyPartRefs
1
Pin socket
J14
1
C2982271
16V 2A
F1
4
C369141
24V 50mA
F2, F3, F4, F5
1
ESP32-C3-WROOM-02
SM1
1
C2888932
Tactile, right-angle
SW1
1
Tactile 3.3mm
SW2
1
XL-1606SURC
LED0
2
XL-1606UWC
LED1, LED2
2
XL-1606UGC
LED3, LED4
5
C7496823
Ice Blue
LED5, LED6, LED7, LED8, LED19
9
C7496826
Pink
LED9, LED10, LED11, LED12, LED14, LED15, LED16, LED17 +1
1
C2827262
Warm White
LED13
4
SK6812SIDE-A
PIX1, PIX2, PIX3, PIX4
1
C7473216
D_TVS
D0
7
1N5819WT
D1, D2, D3, D4, D5, D6, D7
1
4U7
4u7
L1
4
1u
C1, C2, C4, C5
3
1000U/6.3V
1000u/6.3V
C6, C7, C8
1
330U/6.3V
330u/6.3V
C9
3
10U
10u
C10, C11, C17
2
0U1
0u1
C12, C13
2
22U
22u
C14, C15
1
100U/35V
100u/35V
C16
7
5K1
R1, R2, R16, R18, R19, R20, R22
2
10K
R3, R9
1
1K
R4
9
100K
R5, R6, R7, R17, R30, R32, R33, R34 +1
1
57K6
R8
2
2K2
R10, R11
8
15R4
R12, R13, R14, R15, R24, R25, R26, R27
2
13K
R37, R38
4
5K1
RN1, RN5, RN6, RN11
6
100K
RN3, RN4, RN7, RN8, RN9, RN10

Esp av design files

The KiCad project lives in the smkent/pcb repository on GitHub; these links point at the commit this page was built from.

Esp av: common questions

What microcontroller does the Esp av use?

The Esp av is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Esp av PCB?

The Esp av measures 100 × 66 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp av?

145 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp av design files?

From the smkent/pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp av design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which smkent chose for the repository.

Can I test firmware for the Esp av without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in pcb

Similar boards