PIR Movement sensor board panel
SolderedElectronics·PIR-Movement-sensor-board-hardware-design·CAD/V2.2.0/PANEL/PIR Movement sensor board_panel.kicad_pcb
About the PIR Movement sensor board panel
PIR Movement sensor board panel is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 88 × 88 mm, with 20 components from 18 distinct parts.
Other key parts include the AM312, SE5218 and NE555DR. By type, the board carries 5 capacitors, 4 resistors, 3 ICs, 2 transistors, 2 jumpers and 2 relays.
It belongs with the sensors designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for PIR-Movement-sensor-board designed by Soldered Electronics.
A PIR (passive infrared) motion sensor is a device that detects physical movement within its field of vision by sensing changes in infrared radiation. This sensor works on the principle of detecting thermal thermal signals emitted by objects, mainly warm-blooded creatures like humans. The “passive” in the name refers to the fact that the sensor itself does not emit or radiate any energy for detection.

Main components on the PIR Movement sensor board panel
PIR Movement sensor board panel bill of materials (BOM)
20 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AM312 | PIR_senzor | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 1 | NE555DR | SOIC−8 | U3 |
| 1 | NMOS | SOT-23-3 | Q1 |
| 1 | PNP | SOT-23-3 | Q2 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP2 |
| 1 | HEADER_MALE_4X1 | HEADER_MALE_4X1 | K1 |
| 1 | PIR_lens | PIR_senzor_kapica | K2 |
| 2 | 2U2 2u2 | 0603C | C1, C2 |
| 1 | 100N 100n | 0603C | C3 |
| 1 | 10N 10n | 0603C | C4 |
| 1 | EMZR160ARA681MHA0G | ELECTROLITIC_CAP_8x8x14.5 | C5 |
| 1 | TC33X-2-105E | tc33x-2-103e | R1 |
| 1 | 10K 10k | 0603R | R2 |
| 1 | 1k | 0603R | R3 |
| 1 | 10R | 0603R | R4 |
PIR Movement sensor board panel design files
The KiCad project lives in the SolderedElectronics/PIR-Movement-sensor-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
PIR Movement sensor board panel: common questions
How big is the PIR Movement sensor board panel?
The PIR Movement sensor board panel measures 88 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PIR Movement sensor board panel?
20 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PIR Movement sensor board panel design files?
From the SolderedElectronics/PIR-Movement-sensor-board-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PIR Movement sensor board panel design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
More boards in PIR-Movement-sensor-board-hardware-design
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956