SNES-FeRAM-Cart
soniccd123·SNES-FeRAM-Cart
About the SNES-FeRAM-Cart PCB
SNES-FeRAM-Cart is an open source PCB design by soniccd123, published on GitHub. It is a 2-layer board measuring 98.5 × 79.5 mm, with 19 components from 13 distinct parts.
Other key parts include the 4081, 4071, 27C322, 74LS245 and 74LS139. By type, the board carries 7 ICs, 5 resistors, 3 connectors, 2 capacitors, 1 switch and 1 diode.
It belongs with the retro computing designs in this gallery.
From the project
Open Hardware SNES Cartridge with save capability
This project was possible thanks to poorstudenthobbyist (Very nice and informative guides) and whicker (Showed the basics of how to wire a FeRAM to SNES), as well as other members of NESdev forums.
I also find the canibalization of original cartridges for making repros, while understandable in many cases, discusting, so, may this project help to curb this practice.
Main components on the SNES-FeRAM-Cart
SNES-FeRAM-Cart bill of materials (BOM)
19 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4081 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 4071 | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | 27C322 | DIP-42_W15.24mm | U3 |
| 2 | 74LS245 | SOIC-20W_7.5x12.8mm_P1.27mm | U5, U6 |
| 1 | 74LS139 | SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | FM18W08-SG | SOIC-28W_7.5x17.9mm_P1.27mm | U8 |
| 1 | SNES-EDGE | SNES-EDGE-Bigger | CON1 |
| 2 | Conn_01x23_Male | PinSocket_1x23_P2.54mm_Vertical | J1, J2 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | LED | LED_D3.0mm | D1 |
| 2 | C | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 4 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
SNES-FeRAM-Cart design files
The KiCad project lives in the soniccd123/SNES-FeRAM-Cart repository on GitHub; these links point at the commit this page was built from.
- Layoutsnes_feram.kicad_pcb
SNES-FeRAM-Cart: common questions
How big is the SNES-FeRAM-Cart PCB?
The SNES-FeRAM-Cart measures 98.5 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SNES-FeRAM-Cart?
19 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the SNES-FeRAM-Cart design files?
From the soniccd123/SNES-FeRAM-Cart repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SNES-FeRAM-Cart design in my own project?
The repository has no license, so all rights stay with soniccd123. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k