9 open source boards using the FM18W08-SG
Real designs built with the FM18W08-SG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SNES-FeRAM-Cart
soniccd123
98.5 × 79.5 mm19 parts2LNo license87AVR/Arduino
Sgb mbc5 1-4
MouseBiteLabs
110.7 × 69.8 mm88 parts4LCC-BY-SA-4.040RP2040/RP2350
MatrixDrive
Matrixite
100 × 65 mm143 parts8LNo license0As11-comp
AvalonSemiconductors
98.6 × 99.4 mm109 parts4LApache-2.00AVR/Arduino
Coolgirl nes multicart
viuhimciuc
100 × 59 mm61 parts2LNo license0RAMboard
ALXCO-Hardware
21.6 × 38.1 mm4 parts2LCC-BY-4.058Mbc3 FRAM typeA 1-1
MouseBiteLabs
53 × 62 mm23 parts2LCC-BY-SA-4.049Fram breakout
AvalonSemiconductors
19.3 × 37.1 mm4 parts2LApache-2.00Mbc5 FRAM typeA 1-1
MouseBiteLabs
53 × 62 mm10 parts2LCC-BY-SA-4.049
How designs wire the FM18W08-SG
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the FM18W08-SG connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 100% | — |
| CSpin 20 | Connected to: 74LVC1G332 33% |
|
| VCCpin 28 | Connected to: 5V 100% |
|
25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SNES-FeRAM-Cart by soniccd123, RAMboard by ALXCO-Hardware, Mbc3 FRAM typeA 1-1 by MouseBiteLabs and Sgb mbc5 1-4 by MouseBiteLabs.
The FM18W08-SG in open source designs
The gallery holds 9 open source boards using the FM18W08-SG from 7 GitHub repositories; a typical one measures about 98.5 × 62 mm and carries around 23 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is SNES-FeRAM-Cart by soniccd123.
Parts used alongside the FM18W08-SG
Microcontrollers on boards using the FM18W08-SG
What boards using the FM18W08-SG are built for
FM18W08-SG: common questions
Where can I find a FM18W08-SG reference design?
Each of the 9 boards on this page is a real design using the FM18W08-SG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the FM18W08-SG VCC pin?
The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the FM18W08-SG.
Which microcontrollers do boards using the FM18W08-SG use?
Most are built on AVR/Arduino (2) and RP2040/RP2350 (1).
How big is a typical board using the FM18W08-SG?
The median is 98.5 × 62 mm, and 67% are two-layer designs.
What is the most popular open source board using the FM18W08-SG?
By GitHub stars, SNES-FeRAM-Cart by soniccd123, with 87 stars.
Can I simulate one of these boards using the FM18W08-SG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.