17 open source boards using the 4081
Real designs built with the 4081, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SNES-FeRAM-Cart
soniccd123
98.5 × 79.5 mm19 parts2LNo license87AVR/Arduino
Main board
m0xpd
108 × 88 mm124 parts2LCC-BY-SA-4.025Euclid Main Board
m0xpd
78 × 108 mm128 parts2LCC-BY-SA-4.07STM32
Sensored-3-P-BLDC-Closed-Loop-V1
g-rahul
100 × 100 mm114 parts2LNo license5Ampmeter clock
Sirawit7205
100 × 100 mm147 parts4LCERN-OHL-S-2.04SBC4040
ryomuk
190.5 × 127 mm145 parts2LMIT3STM32
RyanShalini SmartPDM
LHRIC
149.7 × 158.4 mm235 parts4LNo license2BSPD +
formulaslug
160 × 124.7 mm137 parts2LNo license21802-Mini-Pixie-Video
dmadole
100 × 100 mm49 parts2LGPL-3.02LogicICClock
nanamitm
96 × 75.8 mm96 parts2LNo license0Anl
0x007E
77.5 × 50.8 mm66 parts2LCC-BY-NC-4.00LaserGameSystem
VectorSpaceHQ
82 × 91.2 mm42 parts2LGPL-3.00Makerspace Access Control
ttstam
150 × 77 mm38 parts2LNo license0One-Shot-Blinking-Light
mlp6
86.4 × 76.2 mm20 parts2LNo license0- schematic only · 27 parts
4bit-CPU
nordinMunteanu
27 partsGPL-3.00 - schematic only · 13 parts
8x8 memory cell rtl
TIShoueb
13 partsNo license0 Raspberry Pi
Motherboard org
BryggansBryggeri
60.2 × 88.8 mm29 parts2LNo license1
How designs wire the 4081
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 4081 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 7 | Connected to: GND 86% | — |
| VDDpin 14 | Connected to: 5V 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SNES-FeRAM-Cart by soniccd123, Euclid Main Board by m0xpd, Sensored-3-P-BLDC-Closed-Loop-V1 by g-rahul and Ampmeter clock by Sirawit7205.
The 4081 in open source designs
The gallery holds 17 open source boards using the 4081 from 17 GitHub repositories; a typical one measures about 100 × 91.2 mm and carries around 66 components.
87% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.
The most starred is SNES-FeRAM-Cart by soniccd123.
Microcontrollers on boards using the 4081
What boards using the 4081 are built for
4081: common questions
Where can I find a 4081 reference design?
Each of the 17 boards on this page is a real design using the 4081. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 4081 VDD pin?
The VDD pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the 4081.
What parts are used alongside the 4081?
The 4001, 40106, 4069, 4071 and 4013 appear in the most repositories here.
Which microcontrollers do boards using the 4081 use?
Most are built on STM32 (2), AVR/Arduino (1) and Raspberry Pi (1).
How big is a typical board using the 4081?
The median is 100 × 91.2 mm, and 87% are two-layer designs.
What is the most popular open source board using the 4081?
By GitHub stars, SNES-FeRAM-Cart by soniccd123, with 87 stars.
Can I simulate one of these boards using the 4081 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.