Fluid dynamics

souptik-samanta·fluid-dynamics

Fluid dynamics PCB layout, top view — open source RP2040/RP2350 board by souptik-samanta

About the Fluid dynamics PCB

Fluid dynamics is an open source RP2040/RP2350 PCB design by souptik-samanta, published on GitHub. It is a 4-layer board measuring 50.1 × 32 mm, with 102 components from 32 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SRV05-4, W25Q128JVS, AMS1117-3.3, MPU-6050 and IS31FL3731-QF. By type, the board carries 48 LEDs, 26 capacitors, 11 resistors, 6 ICs, 4 diodes and 3 connectors.

Main components on the Fluid dynamics

Fluid dynamics bill of materials (BOM)

102 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SRV05-4
U1
1
W25Q128JVS
U2
1
AMS1117-3.3
U3
1
RP2040
U4
1
MPU-6050
U5
1
IS31FL3731-QF
U6
1
CRYSTAL_GND24
Crystal_GND24
Y1
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J2
1
CONN_01X03_PIN
Conn_01x03_Pin
J4
1
CONN_01X04_PIN
Conn_01x04_Pin
J5
1
GP0
SW1
1
C318884
BOOT_SEL
SW2
48
LED
D_L_1_1, D_L_1_2, D_L_1_3, D_L_1_4, D_L_1_5, D_L_1_6, D_L_1_7, D_L_1_8 +40
2
LED
D1, D2
2
LED
D3, D4
1
120OHM.100MHZ
120ohm.100Mhz
FB1
2
15PF
15pF
C1, C2
1
100N
100n
C3
2
10UF
10uF
C4, C6
3
22UF
22uF
C5, C7, C8
Show 12 more
QtyPartRefs
9
100NF
100nF
C9, C10, C13, C14, C15, C16, C17, C18 +1
3
1UF
1uF
C11, C12, C20
2
.1uF
C23, C26
1
2.2NF
2.2nF
C24
1
10NF
10nF
C25
1
10UF
10uF
C30
1
1UF
1uF
C31
4
220
R1, R2, R14, R15
2
1k
R3, R10
2
5.1K
R12, R13
2
27.4
R16, R17
1
20K
R20

Fluid dynamics design files

The KiCad project lives in the souptik-samanta/fluid-dynamics repository on GitHub; these links point at the commit this page was built from.

Fluid dynamics: common questions

What microcontroller does the Fluid dynamics use?

The Fluid dynamics is built around the RP2040, from the RP2040/RP2350 family.

How big is the Fluid dynamics PCB?

The Fluid dynamics measures 50.1 × 32 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Fluid dynamics?

102 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fluid dynamics design files?

From the souptik-samanta/fluid-dynamics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fluid dynamics design in my own project?

The repository has no license, so all rights stay with souptik-samanta. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fluid dynamics without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards