Oxide-S3
ssaunter·Oxide-S3·pcb/Oxide-S3.kicad_pcb
About the Oxide-S3 PCB
Oxide-S3 is an open source ESP32 PCB design by ssaunter, published on GitHub. It is a 2-layer board measuring 108.7 × 71.2 mm, with 29 components from 18 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TP4056-42-ESOP8 and AP2112K-3.3. By type, the board carries 10 switches, 8 connectors, 4 capacitors, 4 resistors and 3 ICs.
It belongs with the displays & leds, power & battery and retro computing designs in this gallery.
From the project
A retro Spotify interface.
The device uses three seperate PCBs, one for the front, one for the top, and one for the side. The front PCB includes the displays, LiPo battery management, the MCU, and USB-C for charging. The top PCB includes the 6 Cherry MX Blue switches, and one of the rotary encoders. The side PCB simply includes the final rotary encoder. The small PCBs are connected to the front PCB using JST-XH cables.

Main components on the Oxide-S3
Oxide-S3 bill of materials (BOM)
29 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | JST Socket | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | OLED_DISPLAY | SSD1306-0.91-OLED-4pin-128x32 | J3 |
| 1 | 1x14 | 3.5_TFT_Screen | J4 |
| 2 | JST XH 1x10 | JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical | J6, J8 |
| 2 | JST XH 1x4 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7, J9 |
| 6 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW7, SW8 |
| 1 | SW_Wuerth_450301014042 | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW9 |
| 1 | SW_Push | SW_SPST_Omron_B3FS-100xP | SW10 |
| 2 | 10 uF | C_0603_1608Metric | C1, C2 |
| 2 | 0.1 uF | C_0603_1608Metric | C3, C4 |
| 1 | 1.2k | R_0603_1608Metric | R1 |
| 1 | 10k | R_0603_1608Metric | R2 |
| 2 | 5.1k | R_0603_1608Metric | R3, R4 |
Oxide-S3 design files
The KiCad project lives in the ssaunter/Oxide-S3 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/Oxide-S3.kicad_pcb
- Schematicpcb/Oxide-S3.kicad_sch
- BOMbom.csv
Oxide-S3: common questions
What microcontroller does the Oxide-S3 use?
The Oxide-S3 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Oxide-S3 PCB?
The Oxide-S3 measures 108.7 × 71.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Oxide-S3?
29 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Oxide-S3 design files?
From the ssaunter/Oxide-S3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Oxide-S3 design in my own project?
The repository has no license, so all rights stay with ssaunter. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Oxide-S3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k