LoRa-V3-Sensor
Strooom·LoRa-V3-Sensor-PCB
About the LoRa-V3-Sensor PCB
LoRa-V3-Sensor is an open source PCB design by Strooom, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 10 × 10 mm, with 6 components from 5 distinct parts.
Other key parts include the BME680, SHT45-AD1B-R2 and TSL25911FN. By type, the board carries 3 ICs and 2 capacitors.
It belongs with the sensors and rf & radio designs in this gallery.
From the project
KiCAD design files for the LoRa-V3-Sensor-PCB.
KiCAD design files for the LoRa-V3-Sensor-PCB.
This is a small PCB with sensors which plugs into the LoRa-V3-PCB. The purpose is the be able to easily replace the sensors with calibrated ones or upgrade the LoRa-V3 device with newer sensors.

Main components on the LoRa-V3-Sensor
LoRa-V3-Sensor bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME680 | BME68X | IC1 |
| 1 | SHT45-AD1B-R2 | SHT4X | IC2 |
| 1 | TSL25911FN | TSL2591 | IC3 |
| 1 | BC034-08-A-V-0150-L-C Conn_01x08_Pin | GCT_BC034-08-A-V-0150-L-C | CONN1 |
| 2 | CGA3E2X7R1E104K080AA 100nF | C_0603_nominal | C1, C2 |
LoRa-V3-Sensor design files
The KiCad project lives in the Strooom/LoRa-V3-Sensor-PCB repository on GitHub; these links point at the commit this page was built from.
LoRa-V3-Sensor: common questions
How big is the LoRa-V3-Sensor PCB?
The LoRa-V3-Sensor measures 10 × 10 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LoRa-V3-Sensor?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LoRa-V3-Sensor design files?
From the Strooom/LoRa-V3-Sensor-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LoRa-V3-Sensor design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956