16 open source boards using the SHT45-AD1B-R2

Real designs built with the SHT45-AD1B-R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the SHT45-AD1B-R2

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SHT45-AD1B-R2 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF.
  • The SDA pin has a pull-up to 3.3V on 4 of 9 designs, most often 4.7 kΩ (then 5.1 kΩ).
  • The SCL pin has a pull-up to 3.3V on 4 of 9 designs, most often 4.7 kΩ (then 5.1 kΩ).
SDApin 1Connected to: A connector 44%, the microcontroller 33%
  • Pull-up to 3.3V on 44% · 4.7 kΩ (5), 5.1 kΩ (1)
SCLpin 2Connected to: A connector 44%, the microcontroller 33%
  • Pull-up to 3.3V on 44% · 4.7 kΩ (5), 5.1 kΩ (1)
VDDpin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (11)
VSSpin 4Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESPHome-Indoor-Multi-Sensor by mikelawrence, Aether by nasheed-x, Environment sensor myra baseboard by antmicro and Sht45-qt by FrancoSpitale.

The SHT45-AD1B-R2 in open source designs

The gallery holds 16 open source boards using the SHT45-AD1B-R2 from 9 GitHub repositories; a typical one measures about 82 × 59.7 mm and carries around 67 components.

63% use four copper layers or more, and 69% carry an open source license.

The most starred is ESPHome-Indoor-Multi-Sensor by mikelawrence.

Parts used alongside the SHT45-AD1B-R2

Microcontrollers on boards using the SHT45-AD1B-R2

SHT45-AD1B-R2: common questions

Where can I find a SHT45-AD1B-R2 reference design?

Each of the 16 boards on this page is a real design using the SHT45-AD1B-R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SHT45-AD1B-R2 VDD pin?

The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the SHT45-AD1B-R2.

What pull-up resistor is used on the SHT45-AD1B-R2 SDA pin?

The SDA pin has a pull-up to 3.3V on 4 of 9 designs, most often 4.7 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 9 open source designs using the SHT45-AD1B-R2.

What pull-up resistor is used on the SHT45-AD1B-R2 SCL pin?

The SCL pin has a pull-up to 3.3V on 4 of 9 designs, most often 4.7 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 9 open source designs using the SHT45-AD1B-R2.

Which microcontrollers do boards using the SHT45-AD1B-R2 use?

Most are built on ESP32 (10) and AVR/Arduino (1).

How big is a typical board using the SHT45-AD1B-R2?

The median is 82 × 59.7 mm, and 38% are two-layer designs.

What is the most popular open source board using the SHT45-AD1B-R2?

By GitHub stars, ESPHome-Indoor-Multi-Sensor by mikelawrence, with 12 stars.

Can I simulate one of these boards using the SHT45-AD1B-R2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part