7 open source boards using the TLV61046ADB
Real designs built with the TLV61046ADB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FT81x Arduino Driver
blazer82
42.8 × 36.8 mm30 parts4LMIT58STM32
EL-210-MOD
suikan4github
66 × 65 mm36 parts2LMIT3Raspberry Pi
Piweather
pluggee
65 × 64 mm58 parts4LMIT1AVR/Arduino
Atinverter
bcarrillo1051
83.8 × 94.6 mm115 parts2LMIT0STM32
Coffee scale
lucasnoce
60 × 35 mm66 parts2LMIT0Phys-427
AlnisS
22.9 × 50.8 mm20 parts2LNo license0Alarm IO Board
super-cow-powers
80 × 65 mm45 parts2LBSD-3-Clause0
How designs wire the TLV61046ADB
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV61046ADB connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a inductor on 7 of 7 designs, most often 10 µH (then 12 µH).
- The FB pin has a resistor to GND on 6 of 7 designs, most often 71.5 kΩ (then 2.15 kΩ).
- The FB pin has a pull-up to 12V on 6 of 7 designs, most often 1 MΩ (then 61.9 kΩ).
- The VOUT pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SWpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| FBpin 3 | Connected to: Signal 100% |
|
| ENpin 4 | Connected to: Signal 57% · 5V 43% |
|
| VOUTpin 5 | Connected to: 12V 86% |
|
| VIpin 6 | Connected to: 5V 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FT81x Arduino Driver by blazer82, EL-210-MOD by suikan4github, Piweather by pluggee and Phys-427 by AlnisS.
The TLV61046ADB in open source designs
The gallery holds 7 open source boards using the TLV61046ADB from 7 GitHub repositories; a typical one measures about 65 × 64 mm and carries around 45 components.
71% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.
The most starred is FT81x Arduino Driver by blazer82.
Microcontrollers on boards using the TLV61046ADB
TLV61046ADB: common questions
Where can I find a TLV61046ADB reference design?
Each of the 7 boards on this page is a real design using the TLV61046ADB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV61046ADB SW pin connected?
The SW pin has a inductor on 7 of 7 designs, most often 10 µH (then 12 µH). Counted from the KiCad layouts of 7 open source designs using the TLV61046ADB.
What resistor goes on the TLV61046ADB FB pin?
The FB pin has a resistor to GND on 6 of 7 designs, most often 71.5 kΩ (then 2.15 kΩ). Counted from the KiCad layouts of 7 open source designs using the TLV61046ADB.
What decoupling capacitors do designs use on the TLV61046ADB VOUT pin?
The VOUT pin has a decoupling capacitor on 6 of 7 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the TLV61046ADB.
Which microcontrollers do boards using the TLV61046ADB use?
Most are built on STM32 (2), AVR/Arduino (1) and Raspberry Pi (1).
How big is a typical board using the TLV61046ADB?
The median is 65 × 64 mm, and 71% are two-layer designs.
What is the most popular open source board using the TLV61046ADB?
By GitHub stars, FT81x Arduino Driver by blazer82, with 58 stars.
Can I simulate one of these boards using the TLV61046ADB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.