WLED-controller
super9chriss·WLED-controller·PCB/WLED Controller.kicad_pcb
About the WLED-controller PCB
WLED-controller is an open source ESP32 PCB design by super9chriss, published on GitHub. It is a 2-layer board measuring 47.8 × 63.2 mm, with 33 components from 22 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AP63205WU, AP7361C-33E and SN74AHCT125DR. By type, the board carries 11 capacitors, 7 resistors, 5 connectors, 4 ICs, 3 switches and 2 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
a controller for led strips which works with WLED
Microcontroller: ESP32-C3-WROOM-02 with Wi-Fi and Bluetooth LE. Power Input: Supports 12V or 24V DC via dedicated screw terminals. Logic Level Shifter: Integrated SN74AHCT125DR to convert 3.3V logic to 5V for reliable LED data. Connectivity: USB-C receptacle for easy firmware flashing. Led strip ports:** GPIO 1,3,4 and 5 are on the right side of the board(from bottom to top so top is 5 and bottom is 1) and can be used for ledstrips. ## How to use
Main components on the WLED-controller
WLED-controller bill of materials (BOM)
33 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63205WU | TSOT-23-6 | U1 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U2 |
| 1 | AP7361C-33E | SOT-223-3_TabPin2 | U3 |
| 1 | SN74AHCT125DR | SOIC127P600X175-14N | U4 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | SCREW_TERMINAL_01X04 Screw_Terminal_01x04 | TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J2 |
| 1 | SCREW_TERMINAL_01X12 Screw_Terminal_01x12 | TerminalBlock_MaiXu_MX126-5.0-12P_1x12_P5.00mm | J3 |
| 1 | C1509679 Vin | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |
| 1 | 3V3 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J9 |
| 1 | 500SSP1S2M2QEA | SW_500SSP1S2M2QEA | S1 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 1 | C2286 PWRLED | LED_0603_1608Metric | D1 |
| 1 | SK6812 | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D2 |
| 1 | 4.7UH 4.7uH | L_Bourns-SRN8040_8x8.15mm | L1 |
| 4 | 22UF 22uF | C_0603_1608Metric | C1, C2, C12, C13 |
| 2 | 100NF 100nF | C_0402_1005Metric | C3, C11 |
| 3 | 0.1UF 0.1uF | C_0402_1005Metric | C6, C8, C9 |
| 1 | 10UF 10uF | C_1206_3216Metric | C7 |
| 1 | 10UF 10uF | C_0603_1608Metric | C10 |
| 2 | 5.1K | R_0402_1005Metric | R1, R2 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1K | R_0402_1005Metric | R3 |
| 4 | 10K 10k | R_0402_1005Metric | R4, R6, R7, R8 |
WLED-controller design files
The KiCad project lives in the super9chriss/WLED-controller repository on GitHub; these links point at the commit this page was built from.
WLED-controller: common questions
What microcontroller does the WLED-controller use?
The WLED-controller is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the WLED-controller PCB?
The WLED-controller measures 47.8 × 63.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WLED-controller?
33 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WLED-controller design files?
From the super9chriss/WLED-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the WLED-controller design in my own project?
The repository has no license, so all rights stay with super9chriss. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the WLED-controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k