Lexicon hardware
superlexicon·lexicon-hardware·designs/lexicon-dual-rf-dongle/kicad/lexicon_dual_rf_dongle_dual_lr2021.kicad_pcb
About the Lexicon hardware PCB
Lexicon hardware is an open source ESP32 PCB design by superlexicon, published on GitHub. It is a 6-layer board measuring 60.4 × 28.4 mm, with 39 components from 32 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the LR2021IMLTRT, CP2102N-A02-GQFN28R, RT9080-33GJ5 and SKY13373-460LF. By type, the board carries 9 inductors, 8 ICs, 7 diodes, 4 connectors, 3 switches and 2 transistors.
It belongs with the rf & radio designs in this gallery.
From the project
Unified open-hardware repository containing the radio transceiver firmware, Linux/RT-Smart device drivers, 3D enclosures, and reference hardware designs for the Lexicon radio-native blockchain ecosystem.
Unified open-hardware repository containing the radio transceiver firmware, Linux/RT-Smart device drivers, 3D enclosures, and reference hardware designs for the Lexicon radio-native blockchain ecosystem.
All three hardware targets implement the Lexicon Phase-C FLRC Burst Protocol: - Modulation: Semtech LR2021 FLRC up to 2.6 Mbps raw air data rate (511 B physical frames / 495 B payload chunks, 220 µs interframe pacing). - Reassembly Capacity: Up to 64 KB (65,024 B / 132 packets) per burst with per-burst random IDs and 4 concurrent reassembly slots. - Host Serial / IPC Interface: Dedicated…
Main components on the Lexicon hardware
Lexicon hardware bill of materials (BOM)
39 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R8 Espressif Systems | MODULE_ESP32-S3-WROOM-1 | U1 |
| 1 | LR2021IMLTRT LR2021IMLTRT_RF0 Semtech Corporation | VQFN-32-EP_5x5mm_P0.5mm | U2 |
| 1 | LR2021IMLTRT LR2021IMLTRT_RF1 Semtech Corporation | VQFN-32-EP_5x5mm_P0.5mm | U3 |
| 1 | CP2102N-A02-GQFN28R CP2102N-A02-GQFN28 Silicon Labs | QFN-28-EP_5x5mm_P0.5mm | U4 |
| 1 | RT9080-33GJ5 RT9080-33GJ5_DIG Richtek / TI | SOT-23-5 | U5 |
| 1 | RT9080-33GJ5 RT9080-33GJ5_RF0 Richtek / TI | SOT-23-5 | U6 |
| 1 | RT9080-33GJ5 RT9080-33GJ5_RF1 Richtek / TI | SOT-23-5 | U7 |
| 1 | SKY13373-460LF Skyworks Solutions | QFN-12_2x2mm | U8 |
| 2 | UMH3NTR UMH3N ROHM Semiconductor | SOT-363_SC-70-6 | Q1, Q2 |
| 1 | NT2016SA-32.000000MHZ-NBG2 32.000MHz_TCXO_0 NDK / Kyocera | SMD-2016_4P | Y1 |
| 1 | NT2016SA-32.000000MHZ-NBG2 32.000MHz_TCXO_1 NDK / Kyocera | SMD-2016_4P | Y2 |
| 1 | TYPE-C-31-M-12 USB-C-16P-NATIVE Korean Hroparts / Amphenol | USB-C-SMD-16P-H3.16 | J1 |
| 1 | TYPE-C-31-M-12 USB-C-16P-UART Korean Hroparts / Amphenol | USB-C-SMD-16P-H3.16 | J2 |
| 1 | 132134-11 SMA-EDGE-50OHM Amphenol RF / Cinch | SMA-EDGE-LAUNCH-1.6MM | J3 |
| 1 | U.FL-R-SMT-1(10) U.FL-R-SMT-1 Hirose Electric | U.FL-SMD-3P | J4 |
| 1 | TA0632A TA0632A_915MHz_SAW Tai-Saw Technology | SMD-1411_5P | FL1 |
| 1 | LFD18868MDP2B909 LFD18868M_918MHz_2G4 Murata / Tai-Saw | SMD-1608_6P | FL2 |
| 1 | S02-16110300 RF-SHIELD-RF0 Masach / Harwin | SHIELD-CAN-16x11MM | SH1 |
| 1 | S02-16110300 RF-SHIELD-RF1 Masach / Harwin | SHIELD-CAN-16x11MM | SH2 |
| 1 | PTS636SM43SMTRLFS PTS636-RST C&K Components | SW-SMD-6.0x3.5mm | SW1 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PTS636SM43SMTRLFS PTS636-BOOT C&K Components | SW-SMD-6.0x3.5mm | SW2 |
| 1 | PTS636SM43SMTRLFS PTS636-KEY C&K Components | SW-SMD-6.0x3.5mm | SW3 |
| 2 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | D1, D2 |
| 1 | RClamp0521PATCT RClamp0521P_SMA Semtech Corporation | SLP1006P2_0402 | D3 |
| 1 | RClamp0521PATCT RClamp0521P_UFL Semtech Corporation | SLP1006P2_0402 | D4 |
| 1 | WS2812B-2020 Worldsemi | LED-SMD-2020_4P | D5 |
| 2 | B5819WSL CJ / Diodes Inc | SOD-123FL | D6, D7 |
| 3 | BLM18PG121SN1D Murata Electronics | 0603 | FB1, FB2, FB3 |
| 2 | LQW15AN12NJ00D 12nH_RF0 Murata Electronics | 0402 | L1, L2 |
| 2 | LQW15AN12NJ00D 12nH_RF1 Murata Electronics | 0402 | L3, L4 |
| 1 | LQW15AN6N8G00D 6.8nH_RF0 Murata Electronics | 0402 | L5 |
| 1 | LQW15AN6N8G00D 6.8nH_RF1 Murata Electronics | 0402 | L6 |
Lexicon hardware design files
The KiCad project lives in the superlexicon/lexicon-hardware repository on GitHub; these links point at the commit this page was built from.
Lexicon hardware: common questions
What microcontroller does the Lexicon hardware use?
The Lexicon hardware is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the Lexicon hardware PCB?
The Lexicon hardware measures 60.4 × 28.4 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Lexicon hardware?
39 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lexicon hardware design files?
From the superlexicon/lexicon-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lexicon hardware design in my own project?
The repository has no license, so all rights stay with superlexicon. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lexicon hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k