39 open source boards using the CP2102N-A02-GQFN28R
Real designs built with the CP2102N-A02-GQFN28R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FujiNet-Astrocade-Rev0
FujiNetWIFI
96 × 58 mm77 parts6LCERN-OHL-S-2.0138ESP32
C3 epaper controller w/touch
martinberlin
70.2 × 71 mm58 parts4LApache-2.032ESP32
Access controller
physiii150 × 90 mm186 parts4LNo license13ESP32
Obsidian boa r0.1
silvioviscuso
35.6 × 17.8 mm71 parts4LNo license10Ups usb
voltlog
64 × 37 mm19 parts2LGPL-3.010All in one-USB-3.1-Hub for-EE-Engineers
jobitjoseph
165 × 50 mm298 parts4LNo license8ESP32
ESP32MiniDrop
stasiselectronics
74 × 54 mm25 parts2LCERN-OHL-S-2.04ESP32
Partial Drawer Controller v1
Robast-GmbH
408.7 × 50 mm556 parts4LMIT1ESP32
LED Cloud
wasauce
171 × 124 mm377 parts4LNo license1ESP32
E badge
BYU-I-eBadge
131.5 × 83.5 mm207 parts2LMIT1ESP32
LADA
milutintech
137.2 × 61.6 mm90 parts4LNo license1ESP32
Roadster course
jeffreydthompson
60 × 40 mm79 parts4LCC-BY-4.01ESP32
Lexicon hardware
superlexicon
60.4 × 28.4 mm39 parts6LNo license1- schematic only · 47 partsESP32
MY-COOL-ESP32
bhardwajpragya1111-lgtm
47 partsNo license1 ESP32
RX8-7(Finished BeforeESPChange)
bradport02
165.3 × 123.7 mm407 parts4LNo license0ESP32
Vivonics bench
physiii
173 × 61.1 mm175 parts4LNo license0ESP32
Acestat-Wireless
jobitjoseph
81 × 61 mm134 parts4LNo license0ESP32
A3-control center
Axsel
100 × 70 mm109 parts4LNo license0ESP32
E-GoCart
Obili69
128.4 × 70.9 mm105 parts4LNo license0ESP32
VCU3.0
milutintech
128.4 × 70.9 mm105 parts4LNo license0ESP32
ESP32-S3-4Layer-CoreBoard
gorkemguven
102.9 × 43.7 mm101 parts4LGPL-3.00ESP32
ECE445L Lab7Restart
Andres-Wearden
150 × 90 mm83 parts2LNo license0ESP32
Nx-PCBA
jgrano
110 × 85 mm78 parts2LNo license0ESP32
CarStatTracker
ShreshtChopra1
71.1 × 71.1 mm41 parts4LMIT0DisProg
disgran
35 × 18.2 mm22 parts2LGPL-3.00ESP32
FujiNet-INTV-Rev0
FujiNetWIFI
58.2 × 78 mm77 parts4LCERN-OHL-S-2.0138ESP32
S3-27-epaper touch
martinberlin
65.4 × 71 mm51 parts4LApache-2.032A1S Mini Board
martinroger
58.8 × 55.8 mm70 parts2LMIT23ESP32
V1
silvioviscuso
35.6 × 17.8 mm67 parts4LNo license10ESP32
Partial Drawer Controller v1 hotfix
Robast-GmbH
408.7 × 50 mm556 parts4LMIT1ESP32
RX8-7
bradport02
165.3 × 123.7 mm401 parts4LNo license0STM32
STM Board
WestianPKl
74.1 × 91.8 mm127 parts4LNo license0ESP32
VCU2.0
milutintech
137.2 × 61.6 mm87 parts4LNo license0Ground RF Controller
Apex-Ottawa-Team
36.1 × 37.8 mm27 parts4LGPL-3.00ESP32
V9
silvioviscuso
35.6 × 17.8 mm62 parts4LNo license10ESP32
Drawer Controller v4
Robast-GmbH
118 × 47 mm126 parts4LMIT1
How designs wire the CP2102N-A02-GQFN28R
Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the CP2102N-A02-GQFN28R connects to, and the resistors, capacitors and other passives placed on it.
- The SUSPEND pin is left unconnected on 25 of 25 designs.
- The RS485/GPIO.2 pin is left unconnected on 25 of 25 designs.
- The GPIO.6 pin is left unconnected on 25 of 25 designs.
- The GPIO.4 pin is left unconnected on 25 of 25 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DCDpin 1 | Connected to: Not connected 88% | — |
| RI/CLKpin 2 | Connected to: Not connected 92% | — |
| GNDpin 3, 29 | Connected to: GND 92% | — |
| VDDpin 6 | Connected to: 3.3V 64% · a signal 32% |
|
| VREGINpin 7 | Connected to: 3.3V 84% |
|
| VBUSpin 8 | Connected to: Signal 76% · VBUS 20% |
|
| RSTBpin 9 | Connected to: Signal 76% · not connected 24% |
|
| NCpin 10 | Connected to: Not connected 100% | — |
| SUSPENDBpin 11 | Connected to: Not connected 64% · a signal 36% |
|
| SUSPENDpin 12 | Connected to: Not connected 100% | — |
| CHRENpin 13 | Connected to: Not connected 96% | — |
| CHR1pin 14 | Connected to: Not connected 96% | — |
| CHR0pin 15 | Connected to: Not connected 92% | — |
| WAKEUP/GPIO.3pin 16 | Connected to: Not connected 96% | — |
| RS485/GPIO.2pin 17 | Connected to: Not connected 100% | — |
| RXT/GPIO.1pin 18 | Connected to: Not connected 84% · a signal 16% | — |
| TXT/GPIO.0pin 19 | Connected to: Not connected 84% · a signal 16% | — |
| GPIO.6pin 20 | Connected to: Not connected 100% | — |
| GPIO.5pin 21 | Connected to: Not connected 96% | — |
| GPIO.4pin 22 | Connected to: Not connected 100% | — |
| CTSpin 23 | Connected to: Not connected 88% | — |
| RTSpin 24 | Connected to: Signal 84% · not connected 16% |
|
| RXDpin 25 | Connected to: The microcontroller 24% |
|
| TXDpin 26 | Connected to: The microcontroller 24% |
|
| DSRpin 27 | Connected to: Not connected 100% | — |
| DTRpin 28 | Connected to: Signal 80% · not connected 20% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FujiNet-Astrocade-Rev0 by FujiNetWIFI, C3 epaper controller w/touch by martinberlin, A1S Mini Board by martinroger and Access controller by physiii.
The CP2102N-A02-GQFN28R in open source designs
The gallery holds 39 open source boards using the CP2102N-A02-GQFN28R from 28 GitHub repositories; a typical one measures about 106.4 × 61.4 mm and carries around 90 components.
82% use four copper layers or more, and 44% carry an open source license.
The most starred is FujiNet-Astrocade-Rev0 by FujiNetWIFI.
Parts used alongside the CP2102N-A02-GQFN28R
What boards using the CP2102N-A02-GQFN28R are built for
CP2102N-A02-GQFN28R: common questions
Where can I find a CP2102N-A02-GQFN28R reference design?
Each of the 39 boards on this page is a real design using the CP2102N-A02-GQFN28R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CP2102N-A02-GQFN28R SUSPEND pin connected?
The SUSPEND pin is left unconnected on 25 of 25 designs. Counted from the KiCad layouts of 26 open source designs using the CP2102N-A02-GQFN28R.
How is the CP2102N-A02-GQFN28R RS485/GPIO.2 pin connected?
The RS485/GPIO.2 pin is left unconnected on 25 of 25 designs. Counted from the KiCad layouts of 26 open source designs using the CP2102N-A02-GQFN28R.
How is the CP2102N-A02-GQFN28R GPIO.6 pin connected?
The GPIO.6 pin is left unconnected on 25 of 25 designs. Counted from the KiCad layouts of 26 open source designs using the CP2102N-A02-GQFN28R.
What parts are used alongside the CP2102N-A02-GQFN28R?
The ADS1015IDGST, BC817, BTS716GB, C2913204 and ESP32-S3-WROOM-1-N16R8 appear in the most repositories here.
Which microcontrollers do boards using the CP2102N-A02-GQFN28R use?
Most are built on ESP32 (33) and STM32 (1).
How big is a typical board using the CP2102N-A02-GQFN28R?
The median is 106.4 × 61.4 mm, and 18% are two-layer designs.
What is the most popular open source board using the CP2102N-A02-GQFN28R?
By GitHub stars, FujiNet-Astrocade-Rev0 by FujiNetWIFI, with 138 stars.
Can I simulate one of these boards using the CP2102N-A02-GQFN28R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.