Controller

tamahirou·TRC_Noname·TRC2027/TRC2027_CTRL/controller.kicad_pcb

Controller PCB layout, top view — open source RP2040/RP2350 board by tamahirou

About the Controller PCB

Controller is an open source RP2040/RP2350 PCB design by tamahirou, published on GitHub. It is a 2-layer board measuring 143.9 × 63.3 mm, with 39 components from 11 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 16 resistors, 10 diodes, 8 switches, 4 connectors and 1 module.

Main components on the Controller

Controller bill of materials (BOM)

39 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
CONN_01X07_PIN
Conn_01x07_Pin
J6
2
CONN_01X08_PIN
Conn_01x08_Pin
J8, J9
1
CONN_01X03_PIN
Conn_01x03_Pin
J13
8
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
1
R(5V)
D1
1
R(3.3V)
D2
4
Blue LED
D3, D5, D7, D9
4
Green LED
D4, D6, D8, D10
8
10K
10k
R1, R2, R3, R4, R5, R6, R7, R8
8
10
R9, R10, R11, R12, R13, R14, R15, R16

Controller design files

The KiCad project lives in the tamahirou/TRC_Noname repository on GitHub; these links point at the commit this page was built from.

Controller: common questions

What microcontroller does the Controller use?

The Controller is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Controller PCB?

The Controller measures 143.9 × 63.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller?

39 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Controller design files?

From the tamahirou/TRC_Noname repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Controller design in my own project?

The repository has no license, so all rights stay with tamahirou. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in TRC_Noname

Similar boards