TRC2026

tamahirou·TRC_Noname·TRC2026/TRC2026_1/TRC2026.kicad_pcb

TRC2026 PCB layout, top view — open source RP2040/RP2350 board by tamahirou

About the TRC2026 PCB

TRC2026 is an open source RP2040/RP2350 PCB design by tamahirou, published on GitHub. It is a 2-layer board measuring 3 × 3 mm, with 43 components from 25 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the RaspberryPi_Pico_W. By type, the board carries 23 connectors, 7 diodes, 6 resistors, 5 capacitors and 2 modules.

Main components on the TRC2026

TRC2026 bill of materials (BOM)

43 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
RaspberryPi_Pico_W
A2
4
2F接続
J1, J15, J16, J17
1
Aモータードライバー
J2
1
Aモーター出力
J3
1
Bモータードライバー
J4
1
Bモーター出力
J5
1
CONN_01X04_PIN
Conn_01x04_Pin
J6
1
GPS
J7
2
CONN_01X08_PIN
Conn_01x08_Pin
J8, J9
1
メモリ
J10
1
BNO055
J11
1
気温気圧高度センサ
J12
3
CONN_01X04_PIN
Conn_01x04_Pin
J13, J14, J18
1
サーボ1
J19
1
サーボ2
J20
1
サーボ3(予備)
J21
1
LoRa
J22
1
CONN_01X12_PIN
Conn_01x12_Pin
J23
6
UCLAMP3381P.TFT
D9, D10, D11, D12, D13, D14
Show 5 more
QtyPartRefs
1
5V抵抗内蔵LED
D15
4
100μF
C1, C6, C7, C8
1
0.1μF
C3
2
1.5Ω
R1, R4
4
0.1Ω
R2, R3, R5, R6

TRC2026 design files

The KiCad project lives in the tamahirou/TRC_Noname repository on GitHub; these links point at the commit this page was built from.

TRC2026: common questions

What microcontroller does the TRC2026 use?

The TRC2026 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the TRC2026 PCB?

The TRC2026 measures 3 × 3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TRC2026?

43 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TRC2026 design files?

From the tamahirou/TRC_Noname repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TRC2026 design in my own project?

The repository has no license, so all rights stay with tamahirou. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TRC2026 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in TRC_Noname

Similar boards