R Sokutei
tamahirou·TRC_Noname·TRC2027/R_Sokutei/R_Sokutei.kicad_pcb
About the R Sokutei PCB
R Sokutei is an open source RP2040/RP2350 PCB design by tamahirou, published on GitHub. It is a 2-layer board measuring 88.4 × 69.9 mm, with 18 components from 13 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the LM358. By type, the board carries 5 resistors, 4 transistors, 3 connectors, 3 battery holders, 1 IC and 1 module.
Main components on the R Sokutei
R Sokutei bill of materials (BOM)
18 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | DIP-8_W7.62mm | U1 |
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 4 | BSS138 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Conn_02x05_A | PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | Conn_02x05_B | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | CONN_01X04_PIN ディスプレイ | PinSocket_1x04_P2.54mm_Vertical | J15 |
| 3 | Battery | BatteryHolder_Keystone_2460_1xAA | BT1, BT2, BT3 |
| 1 | 0.1u | C_0603_1608Metric | C1 |
| 1 | 4.7K 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 4.7K 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 330 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
R Sokutei design files
The KiCad project lives in the tamahirou/TRC_Noname repository on GitHub; these links point at the commit this page was built from.
R Sokutei: common questions
What microcontroller does the R Sokutei use?
The R Sokutei is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the R Sokutei PCB?
The R Sokutei measures 88.4 × 69.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the R Sokutei?
18 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the R Sokutei design files?
From the tamahirou/TRC_Noname repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the R Sokutei design in my own project?
The repository has no license, so all rights stay with tamahirou. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the R Sokutei without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in TRC_Noname
RP2040/RP2350
TRC2027main2
tamahirou
3 × 3 mm43 parts2LNo license0RP2040/RP2350
TRC2026
tamahirou
3 × 3 mm43 parts2LNo license0RP2040/RP2350
Controller
tamahirou
143.9 × 63.3 mm39 parts2LNo license0TRC2027main ver2
tamahirou
3 × 3 mm37 parts4LNo license0TRC2026 2
tamahirou
3 × 3 mm32 parts2LNo license0TRC2026 Input2
tamahirou
143.9 × 63.3 mm29 parts2LNo license0LM70880
tamahirou
30 × 29 mm25 parts2LNo license0LM70880Module 12V
tamahirou
30 × 29 mm25 parts4LNo license0USB-PD board
tamahirou
10.9 × 48.4 mm13 parts4LNo license0RP2040/RP2350
TRC2026 Input
tamahirou
143.9 × 63.3 mm12 parts2LNo license0DRV8262DDWModule
tamahirou
45 × 31.5 mm11 parts2LNo license0
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k