TRC2027main2

tamahirou·TRC_Noname·TRC2027/TRC2027main2/TRC2027main2.kicad_pcb

TRC2027main2 PCB layout, top view — open source RP2040/RP2350 board by tamahirou

About the TRC2027main2 PCB

TRC2027main2 is an open source RP2040/RP2350 PCB design by tamahirou, published on GitHub. It is a 2-layer board measuring 3 × 3 mm, with 43 components from 20 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the MCP23017-E/SP. By type, the board carries 19 connectors, 10 diodes, 10 resistors, 1 IC, 1 module and 1 switch.

Main components on the TRC2027main2

TRC2027main2 bill of materials (BOM)

43 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP23017-E/SP
MCP23017-E_SP
IC1
1
RaspberryPi_Pico
A1
1
CONN_01X07_PIN
Conn_01x07_Pin
J6
2
BNO055
J7, J11
2
CONN_01X08_PIN
Conn_01x08_Pin
J8, J9
1
Memory
J10
1
Temperature, pressure, and altitude sensor
J12
1
CONN_01X03_PIN
Conn_01x03_Pin
J13
8
CONN_01X04_PIN
Conn_01x04_Pin
J14, J15, J16, J17, J18, J21, J24, J25
1
CONN_01X12_PIN
Conn_01x12_Pin
J19
1
CONN_01X10_PIN
Conn_01x10_Pin
J20
1
CONN_01X20_PIN
Conn_01x20_Pin
J30
1
ST12-303FCG
S1
10
UCLAMP3381P.TFT
D3, D4, D5, D6, D7, D9, D10, D11 +2
1
47U
47u
C3
2
4.7K
4.7k
R1, R2
2
330
R4, R9
4
10
R5, R6, R7, R8
1
75
R10
1
10K
10k
R11

TRC2027main2 design files

The KiCad project lives in the tamahirou/TRC_Noname repository on GitHub; these links point at the commit this page was built from.

TRC2027main2: common questions

What microcontroller does the TRC2027main2 use?

The TRC2027main2 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the TRC2027main2 PCB?

The TRC2027main2 measures 3 × 3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TRC2027main2?

43 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TRC2027main2 design files?

From the tamahirou/TRC_Noname repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TRC2027main2 design in my own project?

The repository has no license, so all rights stay with tamahirou. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TRC2027main2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in TRC_Noname

Similar boards