TRC2026 Input
tamahirou·TRC_Noname·TRC2026/TRC2026_Input/TRC2026_Input/TRC2026_Input.kicad_pcb
About the TRC2026 Input PCB
TRC2026 Input is an open source RP2040/RP2350 PCB design by tamahirou, published on GitHub. It is a 2-layer board measuring 143.9 × 63.3 mm, with 12 components from 6 distinct parts.
Its main chip is the RaspberryPi_Pico_W, from the RP2040/RP2350 family. By type, the board carries 6 connectors, 5 capacitors and 1 module.
Main components on the TRC2026 Input
TRC2026 Input bill of materials (BOM)
12 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico_W | RaspberryPi_Pico_Common_Unspecified | A1 |
| 4 | 2F接続 | PinHeader_1x05_P2.54mm_Vertical | J3, J4, J5, J6 |
| 1 | LoRa | PinSocket_1x12_P2.54mm_Vertical | J22 |
| 1 | CONN_01X12_PIN Conn_01x12_Pin | PinSocket_1x12_P2.54mm_Vertical | J23 |
| 2 | 0.1μF | C_0603_1608Metric | C1, C6 |
| 3 | 100μF | CP_Radial_D8.0mm_P3.50mm | C2, C4, C5 |
TRC2026 Input design files
The KiCad project lives in the tamahirou/TRC_Noname repository on GitHub; these links point at the commit this page was built from.
TRC2026 Input: common questions
What microcontroller does the TRC2026 Input use?
The TRC2026 Input is built around the RaspberryPi_Pico_W, from the RP2040/RP2350 family.
How big is the TRC2026 Input PCB?
The TRC2026 Input measures 143.9 × 63.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TRC2026 Input?
12 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TRC2026 Input design files?
From the tamahirou/TRC_Noname repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TRC2026 Input design in my own project?
The repository has no license, so all rights stay with tamahirou. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TRC2026 Input without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in TRC_Noname
RP2040/RP2350
TRC2027main2
tamahirou
3 × 3 mm43 parts2LNo license0RP2040/RP2350
TRC2026
tamahirou
3 × 3 mm43 parts2LNo license0RP2040/RP2350
Controller
tamahirou
143.9 × 63.3 mm39 parts2LNo license0TRC2027main ver2
tamahirou
3 × 3 mm37 parts4LNo license0TRC2026 2
tamahirou
3 × 3 mm32 parts2LNo license0TRC2026 Input2
tamahirou
143.9 × 63.3 mm29 parts2LNo license0LM70880
tamahirou
30 × 29 mm25 parts2LNo license0LM70880Module 12V
tamahirou
30 × 29 mm25 parts4LNo license0RP2040/RP2350
R Sokutei
tamahirou
88.4 × 69.9 mm18 parts2LNo license0USB-PD board
tamahirou
10.9 × 48.4 mm13 parts4LNo license0DRV8262DDWModule
tamahirou
45 × 31.5 mm11 parts2LNo license0
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k