5 open source boards using the LTV-827
Real designs built with the LTV-827, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Steuereinheit
stonedDiscord
259.7 × 80 mm236 parts2LNo license0AVR/Arduino
All band amp-April-2026
satspares
139.5 × 101 mm142 parts4LMIT0Carte mère V2
MathysPelletier
180.1 × 91.5 mm97 parts2LNo license0Pyblockplc
pyplc
100.3 × 38.1 mm41 parts2LNo license2Linde steering
Technariumas
50 × 26.3 mm21 parts2LApache-2.00
How designs wire the LTV-827
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LTV-827 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series resistor on 3 of 5 designs, most often 10 kΩ (then 200 Ω).
- Pin 3 has a series resistor on 3 of 5 designs, most often 10 kΩ (then 200 Ω).
- Pin 6 has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ (then 1 kΩ).
- Pin 8 has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 80% · 5V 20% |
|
| Pin 2 | Connected to: GND 60% · a signal 40% |
|
| Pin 3 | Connected to: Signal 60% · 5V 40% |
|
| Pin 4 | Connected to: GND 60% · a signal 40% |
|
| Pin 5 | Connected to: GND 60% · a signal 40% |
|
| Pin 6 | Connected to: A connector 60% · VCC 20% |
|
| Pin 7 | Connected to: GND 60% · a signal 40% |
|
| Pin 8 | Connected to: A connector 40% · VCC 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pyblockplc by pyplc, Carte mère V2 by MathysPelletier, All band amp-April-2026 by satspares and Steuereinheit by stonedDiscord.
The LTV-827 in open source designs
The gallery holds 5 open source boards using the LTV-827 from 5 GitHub repositories; a typical one measures about 139.5 × 80 mm and carries around 97 components.
80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Pyblockplc by pyplc.
Microcontrollers on boards using the LTV-827
What boards using the LTV-827 are built for
LTV-827: common questions
Where can I find a LTV-827 reference design?
Each of the 5 boards on this page is a real design using the LTV-827. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LTV-827 pin 1?
Pin 1 has a series resistor on 3 of 5 designs, most often 10 kΩ (then 200 Ω). Counted from the KiCad layouts of 5 open source designs using the LTV-827.
What resistor goes on the LTV-827 pin 3?
Pin 3 has a series resistor on 3 of 5 designs, most often 10 kΩ (then 200 Ω). Counted from the KiCad layouts of 5 open source designs using the LTV-827.
What pull-up resistor is used on the LTV-827 pin 6?
Pin 6 has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the LTV-827.
Which microcontrollers do boards using the LTV-827 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the LTV-827?
The median is 139.5 × 80 mm, and 80% are two-layer designs.
What is the most popular open source board using the LTV-827?
By GitHub stars, Pyblockplc by pyplc, with 2 stars.
Can I simulate one of these boards using the LTV-827 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.