4Batteries Charger
TekBot-Robotics-Challenge·2025-Team-The_Winners-Docs·electonic/testfinal/Kicad/4Batteries_Charger/4Batteries_Charger.kicad_pcb
About the 4Batteries Charger PCB
4Batteries Charger is an open source PCB design by TekBot-Robotics-Challenge, published on GitHub. It is a 2-layer board measuring 119.2 × 101.9 mm, with 9 components from 3 distinct parts.
Other key parts include the TP4056. By type, the board carries 4 ICs, 4 battery holders and 1 connector.
It belongs with the power & battery designs in this gallery.
Main components on the 4Batteries Charger
4Batteries Charger bill of materials (BOM)
9 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TP4056 | TP4056_module | U1, U2, U3, U4 |
| 1 | Conn_01x02_Pin | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 4 | Battery_holder-18650-PC | BAT_holder-18650-PC | BT1, BT2, BT3, BT4 |
4Batteries Charger design files
The KiCad project lives in the TekBot-Robotics-Challenge/2025-Team-The_Winners-Docs repository on GitHub; these links point at the commit this page was built from.
4Batteries Charger: common questions
How big is the 4Batteries Charger PCB?
The 4Batteries Charger measures 119.2 × 101.9 mm, has 2 copper layers and is 1.600198 mm thick.
How many components are on the 4Batteries Charger?
9 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the 4Batteries Charger design files?
From the TekBot-Robotics-Challenge/2025-Team-The_Winners-Docs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 4Batteries Charger design in my own project?
The repository has no license, so all rights stay with TekBot-Robotics-Challenge. Use it as a reference, and ask the author before reusing the design.
More boards in 2025-Team-The_Winners-Docs
AVR/Arduino
Test 3
TekBot-Robotics-Challenge
105.7 × 75.5 mm71 parts2LNo license0ESP8266
Test convoyeur
TekBot-Robotics-Challenge
82.6 × 82.3 mm47 parts2LNo license0AVR/Arduino
Test 22
TekBot-Robotics-Challenge
72 × 58.7 mm27 parts2LNo license0Circuit imprimé de l'alimentation 5V/2A
TekBot-Robotics-Challenge
111.2 × 39.2 mm16 parts2LNo license0AVR/Arduino
Test 2
TekBot-Robotics-Challenge
51.2 × 54.2 mm13 parts2LNo license0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k